Difficulty
Moderate
Steps
5
Time Required
10 minutes
Sections
4
- Rear Case
- 1 step
- Battery
- 1 step
- Mid-Frame
- 2 steps
- Front Camera
- 1 step
Flags
1
Featured Student Guide
This guide has been the hard work of our awesome students and is found to be exceptionally cool by the iFixit staff.
BackLG Stylo 2 Plus
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Rear Case
- To remove the rear case of the phone, insert the spudger into the opening on the back of the case.
- With the spudger parallel to the frame of the phone, slide it along the edge, forcing the casing to pop off.
To remove the rear case of the phone, insert the spudger into the opening on the back of the case.
With the spudger parallel to the frame of the phone, slide it along the edge, forcing the casing to pop off.
1024
Step 2
Battery
- To remove the battery, insert your fingernail or the flat end of the spudger into the dimple at the bottom of the battery and lift upwards.
- Firmly grasp the battery and remove from the phone.
To remove the battery, insert your fingernail or the flat end of the spudger into the dimple at the bottom of the battery and lift upwards.
Firmly grasp the battery and remove from the phone.
Step 3
Mid-Frame
- Using the JIS #000 screwdriver, remove the eleven 4mm screws around the mid-frame.
Using the JIS #000 screwdriver, remove the eleven 4mm screws around the mid-frame.
Step 4
- Insert the metal spudger in the dimple at the base of the cover.
- Pry upward, removing the mid-frame from the phone.
Insert the metal spudger in the dimple at the base of the cover.
Pry upward, removing the mid-frame from the phone.
Step 5
Front Camera
- Using a pair of tweezers, carefully detach the ribbon cable connecting the camera to the motherboard.
- Still using the tweezers, firmly pull up to remove the camera from the phone.
Using a pair of tweezers, carefully detach the ribbon cable connecting the camera to the motherboard.
Still using the tweezers, firmly pull up to remove the camera from the phone.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 4 other contributors
Joshua Sisson
Member since: 05/01/2019
73 Reputation
1 Guide authored
Badges:
2
Team
UW Tacoma, Team S1-G3, Cardinal Spring 2019
Member of UW Tacoma, Team S1-G3, Cardinal Spring 2019
UWT-CARDINAL-S19S1G3
4 Members
14 Guides authored