Difficulty

Moderate

Steps

8

Time Required

                          30 - 45 minutes

Sections

1

  • Rear Camera
  • 8 steps

Flags

Slice and Dice

The steps in this guide should be split up and made into a series of prerequisite guides.

  • BackLG Rebel

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Rear Camera
  • Turn the phone on its side and locate the small groove.
  • Use the plastic opening tool to take the back cover off of the phone.

Turn the phone on its side and locate the small groove.

Use the plastic opening tool to take the back cover off of the phone.

1024

Step 2

  • Locate the small groove on the back of the phone near the bottom.
  • Use the metal spudger to pop open the black plastic covering.
  • Remove black plastic covering.

Locate the small groove on the back of the phone near the bottom.

Use the metal spudger to pop open the black plastic covering.

Remove black plastic covering.

Step 3

  • Use the metal spudger to pop up the black plastic covering near top of phone.
  • Remove the black plastic covering.

Use the metal spudger to pop up the black plastic covering near top of phone.

Remove the black plastic covering.

Step 4

  • Locate the connective pieces on the back of the phone.
  • Use the metal spudger to disconnect both of the connective pieces from the back.

Locate the connective pieces on the back of the phone.

Use the metal spudger to disconnect both of the connective pieces from the back.

Step 5

  • Flip the phone over so the screen is facing up.
  • Slide the metal spudger around the perimeter of the phone until the entire seal has been broken.
  • Use the small suction cup to remove the screen.

Flip the phone over so the screen is facing up.

Slide the metal spudger around the perimeter of the phone until the entire seal has been broken.

Use the small suction cup to remove the screen.

Step 6

  • Locate the black bumper at the bottom of the front of the phone.
  • Use the metal spudger to slide the bumper out.

Locate the black bumper at the bottom of the front of the phone.

Use the metal spudger to slide the bumper out.

Step 7

  • Use the metal spudger to carefully loosen the motherboard from the body of the phone.
  • Slowly slide the motherboard out of the body of the phone.
  • Remove the motherboard.

Use the metal spudger to carefully loosen the motherboard from the body of the phone.

Slowly slide the motherboard out of the body of the phone.

Remove the motherboard.

Step 8

  • Locate the rear camera on the motherboard.
  • Use the metal spudger to disconnect the connective piece at the base of the camera.
  • Remove the camera.

Locate the rear camera on the motherboard.

Use the metal spudger to disconnect the connective piece at the base of the camera.

Remove the camera.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 1 other contributor 


                    Emma Johnson

Member since: 02/08/2018

184 Reputation

                                      1 Guide authored                  



                       Badges:
                       3

Team

                       Sam Houston State, Team S16-G2, Nardone Spring 2018                        

                                                  Member of Sam Houston State, Team S16-G2, Nardone Spring 2018 



                    SHSU-NARDONE-S18S16G2                     


                                            5 Members                     


                                            10 Guides authored