Lg Phoenix 2 Motherboard Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          10 minutes

Sections

Battery
2 steps
Motherboard
4 steps

Flags

BackLG Phoenix 2
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

This guide shows how to replace the motherboard of the LG Phoenix 2, model LG-K371. A motherboard replacement may be necessary if the phone is not working, is badly damaged, or running very poorly. A motherboard replacement may also be needed if the charge port has worn out and you do not want to solder.

What you need

Step 1

              Battery

Place a fingernail in the notch at the bottom edge of the phone.
Pull on the back cover with one hand while keeping the rest of the phone steady, and run your fingernail along the edge.

Place a fingernail in the notch at the bottom edge of the phone.

Pull on the back cover with one hand while keeping the rest of the phone steady, and run your fingernail along the edge.

1024

Step 2

Place a fingernail in the notch at the bottom edge of the battery.
Pull the battery out.

Place a fingernail in the notch at the bottom edge of the battery.

Pull the battery out.

Step 3

              Motherboard

Remove all nine of the 3.0mm screws on the back of the phone using a Phillips #0 screwdriver, including the one attaching the camera lens.

Remove all nine of the 3.0mm screws on the back of the phone using a Phillips #0 screwdriver, including the one attaching the camera lens.

Step 4

With the plastic opening tool, pry between the screen and the outer chrome edge to remove the bottom shield from the rest of the phone.

With the plastic opening tool, pry between the screen and the outer chrome edge to remove the bottom shield from the rest of the phone.

Step 5

With a plastic opening tool, disconnect all three ribbon connectors from the motherboard: one for the front camera, one for the rear camera, and one for the screen.

With a plastic opening tool, disconnect all three ribbon connectors from the motherboard: one for the front camera, one for the rear camera, and one for the screen.

Step 6

Using a plastic opening tool, separate the motherboard from the back frame and remove it from the device.

Using a plastic opening tool, separate the motherboard from the back frame and remove it from the device.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      4 other people completed this guide.

Author

                                      with 2 other contributors

                    Alex Selsley

Member since: 11/04/2019

295 Reputation

                                      2 Guides authored                  



                       Badges:
                       5







                                                        +2 more badges

Team

                       IUPUI, Team S1-G1, Harley Fall 2019                        

                                                  Member of IUPUI, Team S1-G1, Harley Fall 2019 



                    IUPUI-HARLEY-F19S1G1                     


                                            3 Members                     


                                            4 Guides authored

Jon Doer - May 13, 2020

Are the LG Phoenix 2 and LG K8 motherboards interchangeable?

Introduction#

What you need#

Team#

Introduction

What you need

Team