Difficulty

Moderate

Steps

8

Time Required

                          1 hour

Sections

1

  • touch screen
  • 8 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackLG Optimus Black P970

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

You can buy this part on amazon http://www.amazon.fr/dp/B00CF29W78

What you need

Step 1

              touch screen
  • remove the back cover
  • remove the battery
  • remove the SIM card
  • remove the µSD card (Memory)

remove the back cover

remove the battery

remove the SIM card

remove the µSD card (Memory)

1024

Step 2

  • remove 7 screws on the back
  • with a tool start to open the back frame
  • and it’s now easy to remove the back frame with hand, carefully

remove 7 screws on the back

with a tool start to open the back frame

and it’s now easy to remove the back frame with hand, carefully

Step 3

  • remove buttons
  • locate the back camera
  • with a tool raise up the led.carefully

remove buttons

locate the back camera

with a tool raise up the led.carefully

Step 4

  • with a tool disconnect the back camera
  • and remove the camera with your fingers.

with a tool disconnect the back camera

and remove the camera with your fingers.

Step 5

  • don’t forget to remove the little connector of screen, with a tool, right next to the empty slot of the camera.

don’t forget to remove the little connector of screen, with a tool, right next to the empty slot of the camera.

Step 6

  • It’s time to remove carefully the tactile screen.
  • don’t scratch le LCD!!!

It’s time to remove carefully the tactile screen.

don’t scratch le LCD!!!

Step 7

  • the touch panel is glued with double-sided tape. You can remove it with your fingers. carefull with the touch screen connector.
  • cut new double sided tape (1-2mm width), put it on the are and peel it.

the touch panel is glued with double-sided tape. You can remove it with your fingers. carefull with the touch screen connector.

cut new double sided tape (1-2mm width), put it on the are and peel it.

Step 8

  • remove the inside protection on the new touch screen.
  • carefully put the news touch screen on the LG. Take care that the connector goes right through the right hole.
  • to finish, add all part by reading these instructions in reverse ;-)
  • and try if it work !

remove the inside protection on the new touch screen.

carefully put the news touch screen on the LG. Take care that the connector goes right through the right hole.

to finish, add all part by reading these instructions in reverse ;-)

and try if it work !

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      18 other people completed this guide.

Author

                                      with 1 other contributor 


                    Fox4EGX

Member since: 10/01/2012

515 Reputation

                                      1 Guide authored                  



                       Badges:
                       9







                                                        +6 more badges

schutze61 - Nov 27, 2016

Reply

Hi. To take the screws out do I need a phillips? Thanks.