Difficulty

Moderate

Steps

9

Time Required

                          25 minutes

Sections

1

  • Screen
  • 9 steps

Flags

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

  • BackLG Optimus T

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Screen
  • Working on your device while it is turned on may result in electric shock. Make sure to shut down and unplug your device before you begin.
  • Using the plastic opening tool to remove the phone’s back cover. At the top of the phone, there’s an indentation to put the tool into to pop the case off.

Working on your device while it is turned on may result in electric shock. Make sure to shut down and unplug your device before you begin.

Using the plastic opening tool to remove the phone’s back cover. At the top of the phone, there’s an indentation to put the tool into to pop the case off.

1024

Step 2

  • Remove the battery. There’s an indentation to the left of the camera lens.

Remove the battery. There’s an indentation to the left of the camera lens.

Step 3

  • Remove the six (6), J0 Phillip’s head, 4.5mm screws.
  • Be sure to retain all screws for reassembly.

Remove the six (6), J0 Phillip’s head, 4.5mm screws.

Be sure to retain all screws for reassembly.

Step 4

  • Remove interior case. There are indentations on the top and bottom of the phone. Using a spudger, remove the interior case.
  • You might have difficulty popping the interior case off, and a more durable prying device may be needed.

Remove interior case. There are indentations on the top and bottom of the phone. Using a spudger, remove the interior case.

You might have difficulty popping the interior case off, and a more durable prying device may be needed.

Step 5

  • Pull up connector tab
  • Connector tabs may be difficult to remove, and tweezers may be required to assist removal.

Pull up connector tab

Connector tabs may be difficult to remove, and tweezers may be required to assist removal.

Step 6

  • Remove SD card mount. Use a plastic opening tool to assist removal.

Remove SD card mount. Use a plastic opening tool to assist removal.

Step 7

  • Use a J0 screwdriver to remove two 1.8mm screws from the charging port.
  • Charging port and motherboard are connected.
  • Be sure to retain all screws for reassembly.

Use a J0 screwdriver to remove two 1.8mm screws from the charging port.

Charging port and motherboard are connected.

Step 8

  • Remove connector tab. Then remove the motherboard.
  • Connector tabs may be difficult to remove, and tweezers may be required to assist removal.

Remove connector tab. Then remove the motherboard.

Step 9

  • Using a spudger, gently pry off the metal panel on the back of the screen attached by 4 retaining points.
  • Remove the screen from the front of your device.

Using a spudger, gently pry off the metal panel on the back of the screen attached by 4 retaining points.

Remove the screen from the front of your device.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    Edward Farris

Member since: 02/07/2017

112 Reputation

                                      1 Guide authored                  



                       Badges:
                       2

Team

                       Ohio State, Team 1-3, Wilder Spring 2017                        

                                                  Member of Ohio State, Team 1-3, Wilder Spring 2017 



                    OSU-WILDER-S17S1G3                     


                                            4 Members                     


                                            5 Guides authored