Lg Optimus L9 P769 Micro Usb Port Replacement Repair Guide

Difficulty

Moderate

Steps

10

Time Required

                          20 minutes            

Sections

1

• Micro-USB Port
• 10 steps

Flags

0

• BackLG Optimus L9 P769

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Micro-USB Port               

• Power off the device and gently lift the battery cover off to access the battery

Power off the device and gently lift the battery cover off to access the battery

1024

Step 2

• Lift and remove the battery from the notch in the edge of the battery compartment

Lift and remove the battery from the notch in the edge of the battery compartment

Step 3

• Remove all 10 of the 4.5mm screws that hold the back frame to the case of the phone using a PH000 screwdriver.

Remove all 10 of the 4.5mm screws that hold the back frame to the case of the phone using a PH000 screwdriver.

Step 4

• Using a small prying tool, carefully remove the back frame by prying on the sides of the device.
• Do be careful when prying back frame and removing it as too much force may result in damaging the frame.

Using a small prying tool, carefully remove the back frame by prying on the sides of the device.

Do be careful when prying back frame and removing it as too much force may result in damaging the frame.

Step 5

• Remove both connections of the antenna by pulling up with tweezers

Remove both connections of the antenna by pulling up with tweezers

Step 6

• Remove Micro-USB Cache by unscrewing both 2.9mm screws with the PH000 headtype

Remove Micro-USB Cache by unscrewing both 2.9mm screws with the PH000 headtype

Step 7

• Detach module from motherboard using a prying tool

Detach module from motherboard using a prying tool

Step 8

• Remove 1.8mm screw to free Micro-USB module for removal using the PH000 headtype

Remove 1.8mm screw to free Micro-USB module for removal using the PH000 headtype

Step 9

• Use a small prying tool to detach the Micro-USB circuitry from the case of the phone

Use a small prying tool to detach the Micro-USB circuitry from the case of the phone

Step 10

• Comparison showing the Micro-USB module against the empty phone casing

Comparison showing the Micro-USB module against the empty phone casing

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 

                    Kayden G                     

Member since: 03/01/2017

272 Reputation

                                      2 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges                           

Team

                       IUPUI, Team S2-G1, Harley Spring 2017                        

                                                  Member of IUPUI, Team S2-G1, Harley Spring 2017 



                    IUPUI-HARLEY-S17S2G1                     


                                            4 Members                     


                                            6 Guides authored