Difficulty
Moderate
Steps
11
Time Required
5 minutes
Sections
3
- Display
- 5 steps
- SIM Card Slot
- 3 steps
- Headphone Jack
- 3 steps
Flags
2
Action Shots
Be an action hero! This guide needs images that better demonstrate how to perform specific actions.
Missed a Step
Oops! This guide is currently missing some important steps.
BackLG Optimus L7 P705
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Display
- Insert a plastic opening tool between the seams of the device and pry the back cover away from the phone.
- Remove the battery and simcard.
Insert a plastic opening tool between the seams of the device and pry the back cover away from the phone.
Remove the battery and simcard.
1024
Step 2
- Remove twelve 3mm screws (with the phillips head 000) around frame and near sim and sd cards.
Remove twelve 3mm screws (with the phillips head 000) around frame and near sim and sd cards.
Step 3
- Remove bottom plate where the charger port is located.
Remove bottom plate where the charger port is located.
Step 4
- Insert a plastic opening tool between the seams of the device and apply some pressure to lift off the cover.
Insert a plastic opening tool between the seams of the device and apply some pressure to lift off the cover.
Step 5
- Flip over to the face of the device.
- Lift off glass screen (display).
Flip over to the face of the device.
Lift off glass screen (display).
Step 6
SIM Card Slot
- Flip over to the back of the device
- Using the plastic spudger, lift off the three board-to-board connectors on the left-hand side of the device.
Flip over to the back of the device
Using the plastic spudger, lift off the three board-to-board connectors on the left-hand side of the device.
Step 7
- Using a plastic spudger, lift off the wire connector at the right bottom of the board.
Using a plastic spudger, lift off the wire connector at the right bottom of the board.
Step 8
- Detach the mount including both the SIM card and the motherboard from the device.
Detach the mount including both the SIM card and the motherboard from the device.
Step 9
Headphone Jack
- Lift off the connector using the plastic spudger.
Lift off the connector using the plastic spudger.
Step 10
- Lift the speaker connector using the plastic spudger.
Lift the speaker connector using the plastic spudger.
Step 11
- Flip over to the back of the device. Lift off the connector on the left using the plastic spudger.
- Lift off the headphone jack connector on the top right using the plastic spudger.
- Replace the board containing the headphone jack.
Flip over to the back of the device. Lift off the connector on the left using the plastic spudger.
Lift off the headphone jack connector on the top right using the plastic spudger.
Replace the board containing the headphone jack.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 3 other contributors
Tianyu Song
Member since: 01/24/2017
107 Reputation
1 Guide authored
Badges:
4
+1 more badge
Team
IUPUI, Team 2-2, Baechle Spring 2017
Member of IUPUI, Team 2-2, Baechle Spring 2017
IUPUI-BAECHLE-S17S2G2
4 Members
3 Guides authored