Difficulty
Moderate
Steps
7
Time Required
10 minutes
Sections
2
- Battery
- 2 steps
- Motherboard
- 5 steps
Flags
0
BackLG Optimus F60
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Hold the phone in your hand and position the small plastic opening tool or your finger under the lip of the phone by the USB port.
- Pry or lift up on the indent with the opening tool.
- Remove the back panel.
Hold the phone in your hand and position the small plastic opening tool or your finger under the lip of the phone by the USB port.
Pry or lift up on the indent with the opening tool.
Remove the back panel.
1024
Step 2
- Place the small plastic opening tool or your finger at the indentation at the base of the battery.
- Pry upwards or lift with your finger and remove battery.
Place the small plastic opening tool or your finger at the indentation at the base of the battery.
Pry upwards or lift with your finger and remove battery.
Step 3
Motherboard
- Use the Phillips #000 Screwdriver to remove the eight 4mm screws.
Use the Phillips #000 Screwdriver to remove the eight 4mm screws.
Step 4
- Insert the iFixit opening tool in the indentation.
- Pry the plastic using the opening tool to remove the lower back panel.
- Remove the lower back panel from the device.
Insert the iFixit opening tool in the indentation.
Pry the plastic using the opening tool to remove the lower back panel.
Remove the lower back panel from the device.
Step 5
- Insert the iFixit opening tool starting under the charging port.
- Continue to pry at the edges until loose enough to remove.
- Remove the back panel.
Insert the iFixit opening tool starting under the charging port.
Continue to pry at the edges until loose enough to remove.
Step 6
- Find the digitizer connector in the lower left hand corner of the device.
- Use the tweezers to gently lift up and remove the connector.
Find the digitizer connector in the lower left hand corner of the device.
Use the tweezers to gently lift up and remove the connector.
Step 7
- Gently pry the motherboard from the digitizer starting from under the charging port.
- Remove and replace the motherboard.
Gently pry the motherboard from the digitizer starting from under the charging port.
Remove and replace the motherboard.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 1 other contributor
Mohammad Mohammad
Member since: 03/25/2019
451 Reputation
3 Guides authored
Badges:
7
+4 more badges
Team
IUPUI, Team S2-G5, Henning Spring 2019
Member of IUPUI, Team S2-G5, Henning Spring 2019
IUPUI-HENNING-S19S2G5
3 Members
3 Guides authored