Difficulty
Moderate
Steps
7
Time Required
7 minutes
Sections
2
- Battery
- 2 steps
- Front Camera
- 5 steps
Flags
1
Featured Student Guide
This guide has been the hard work of our awesome students and is found to be exceptionally cool by the iFixit staff.
BackLG Optimus F60
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Hold the phone in your hand and position the small plastic opening tool or your finger under the lip of the phone by the USB port.
- Pry or lift up on the indent with the opening tool.
- Remove the back panel.
Hold the phone in your hand and position the small plastic opening tool or your finger under the lip of the phone by the USB port.
Pry or lift up on the indent with the opening tool.
Remove the back panel.
1024
Step 2
- Place the small plastic opening tool or your finger at the indentation at the base of the battery.
- Pry upwards or lift with your finger and remove battery.
Place the small plastic opening tool or your finger at the indentation at the base of the battery.
Pry upwards or lift with your finger and remove battery.
Step 3
Front Camera
- Use the phillips #000 Screwdriver to unscrew eight 4mm screws.
Use the phillips #000 Screwdriver to unscrew eight 4mm screws.
Step 4
- Insert the plastic opening tool in the indentation marked by the red square.
- Pry the plastic opening tool upwards to release the lower back panel.
- Remove the lower back panel from the device.
Insert the plastic opening tool in the indentation marked by the red square.
Pry the plastic opening tool upwards to release the lower back panel.
Remove the lower back panel from the device.
Step 5
- Continue moving plastic opening tool around device until back panel is loose enough to remove.
- Remove the back panel
Continue moving plastic opening tool around device until back panel is loose enough to remove.
Remove the back panel
Step 6
- Locate the digitizer connection on the lower left hand side of the device.
- Use the tweezers to lift up and gently remove the connector.
Locate the digitizer connection on the lower left hand side of the device.
Use the tweezers to lift up and gently remove the connector.
Step 7
- Locate the front camera on the upper left hand side of the device. The camera is marked in red.
- Use the tweezers to remove the front camera from the connector marked in orange.
- Remove and replace front camera.
Locate the front camera on the upper left hand side of the device. The camera is marked in red.
Use the tweezers to remove the front camera from the connector marked in orange.
Remove and replace front camera.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Austin Johnson
Member since: 04/09/2018
171 Reputation
1 Guide authored
Badges:
2
Team
Eastern Washington University, Team S3-G3, Rowley Spring 2018
Member of Eastern Washington University, Team S3-G3, Rowley Spring 2018
EWU-ROWLEY-S18S3G3
6 Members
6 Guides authored