Difficulty
Moderate
Steps
7
Time Required
10 - 20 minutes
Sections
1
- Headphone Jack
- 7 steps
Flags
Markup Mishap
This guide needs better markups. Help out by correcting or making some markup annotations.
BackLG Optimus F3
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Headphone Jack
- Place your thumb at the bottom of the phone’s back where the charging port is located.
- Gently pull the cover off.
Place your thumb at the bottom of the phone’s back where the charging port is located.
Gently pull the cover off.
1024
Step 2
- Using the indent at the bottom of the battery, lift and remove the battery from the phone.
- Place the battery in a safe location as you will need it for reassembly.
Using the indent at the bottom of the battery, lift and remove the battery from the phone.
Place the battery in a safe location as you will need it for reassembly.
Step 3
- Remove the ten 1.0 mm screws on the rear case.
- Place the screws in a safe location as you will need them for reassembly.
Remove the ten 1.0 mm screws on the rear case.
Place the screws in a safe location as you will need them for reassembly.
Step 4
- Pry apart the joints to separate the inner case.
- Insert the opening tool on different locations until the case comes off easily.
- To avoid damaging the joints of the case do not pry if there is resistance.
Pry apart the joints to separate the inner case.
Insert the opening tool on different locations until the case comes off easily.
To avoid damaging the joints of the case do not pry if there is resistance.
Step 5
- With the inner cover removed, locate your headphone jack.
- It will be in the upper right corner on the back of the phone.
With the inner cover removed, locate your headphone jack.
It will be in the upper right corner on the back of the phone.
Step 6
- Gently grab the headphone jack along the sides with tweezers.
- Lift the headphone jack out of its socket.
Gently grab the headphone jack along the sides with tweezers.
Lift the headphone jack out of its socket.
Step 7
- Insert the new headphone jack into the headphone socket by lining up the connectors and gently pressing down.
- Make sure the dark side without the connectors is face up.
Insert the new headphone jack into the headphone socket by lining up the connectors and gently pressing down.
Make sure the dark side without the connectors is face up.
To reassemble your device follow these steps in reverse order.
Cancel: I did not complete this guide.
4 other people completed this guide.
Author
with 10 other contributors
Ryan McDermott
Member since: 10/28/2015
324 Reputation
2 Guides authored
Badges:
8
+5 more badges
Team
UMass Dartmouth, Team 1-5, Miles Fall 2015
Member of UMass Dartmouth, Team 1-5, Miles Fall 2015
UMASSD-MILES-F15S1G5
3 Members
5 Guides authored