Difficulty

Moderate

Steps

5

Time Required

Suggest a time??

Sections

1

  • Speaker
  • 5 steps

Flags

3

Bullets!

Better coordination with markups and the color/type of bullets will help make this guide more clear!

Better Introduction

Improve this guide by completing or revising its introduction.

Missing Details

Some of this guide’s details are missing. Help users by adding tools, difficulty, or time.

  • BackLG Neon GT 365

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Speaker
  • With one hand, push the rectangular button located on the back top-side of the phone.
  • With your other hand, remove the rear cover.

With one hand, push the rectangular button located on the back top-side of the phone.

With your other hand, remove the rear cover.

1024

Step 2

  • Remove 5 screws, 1 from each corner of the phone and 1 from the center-right of the phone.

Remove 5 screws, 1 from each corner of the phone and 1 from the center-right of the phone.

Step 3

  • Now pull off the rear casing, using an opening tool. Buttons for volume and pictures may fall out

Now pull off the rear casing, using an opening tool. Buttons for volume and pictures may fall out

Step 4

  • Once you have removed the rear casing flip it over to see a small circular metal piece with 2 gold springs sticking out of the bottom. That is the speaker.
  • Opposite the 2 small gold springs there will be a small black tab attached to the speaker sitting in a groove. Using tweezers or a small tipped screwdriver lift up on the tab to pop the speaker out.

Once you have removed the rear casing flip it over to see a small circular metal piece with 2 gold springs sticking out of the bottom. That is the speaker.

Opposite the 2 small gold springs there will be a small black tab attached to the speaker sitting in a groove. Using tweezers or a small tipped screwdriver lift up on the tab to pop the speaker out.

Step 5

  • Replace the broken speaker with a new one (make sure to line up the tab with the groove). Push firmly into place. Follow reverse instructions to put the rear casing and back cover on.

Replace the broken speaker with a new one (make sure to line up the tab with the groove). Push firmly into place. Follow reverse instructions to put the rear casing and back cover on.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 8 other contributors 


                    kristie

Member since: 10/23/2013

538 Reputation

                                      5 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges

Team

                       UMass Dartmouth, Team 2-1, Gulbrandsen Fall 2013                        

                                                  Member of UMass Dartmouth, Team 2-1, Gulbrandsen Fall 2013 



                    UMASSD-GULBRANDSEN-F13S2G1                     


                                            4 Members                     


                                            10 Guides authored