Difficulty

Moderate

Steps

5

Time Required

Suggest a time??

Sections

1

  • Keyboard
  • 5 steps

Flags

2

Bullets!

Better coordination with markups and the color/type of bullets will help make this guide more clear!

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackLG Neon GT 365

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Keyboard
  • With one hand, push the rectangular button located on the back top-side of the phone.
  • With your other hand, remove the rear cover.

With one hand, push the rectangular button located on the back top-side of the phone.

With your other hand, remove the rear cover.

1024

Step 2

  • Remove 5 screws, 1 from each corner of the phone and 1 from the center-right of the phone.

Remove 5 screws, 1 from each corner of the phone and 1 from the center-right of the phone.

Step 3

  • Now pull off the rear casing, using an opening tool. Buttons for volume and pictures may fall out

Now pull off the rear casing, using an opening tool. Buttons for volume and pictures may fall out

Step 4

  • Hold the circuit board and turn the phone upside down.
  • Then let the circuit board hang down so you can disconnect the ribbon by getting under an edge and popping it off. the rubber keyboard may fall out

Hold the circuit board and turn the phone upside down.

Then let the circuit board hang down so you can disconnect the ribbon by getting under an edge and popping it off. the rubber keyboard may fall out

Step 5

  • Once the circuit board has been removed the rubber keypad will be visible. If it has not fallen out on its own it can simply be peeled out. It is lightly attached like a sticker on the top three tabs. The left most table is labeled “B”, the center tab is blank, and the right tab is labeled “N”.

Once the circuit board has been removed the rubber keypad will be visible. If it has not fallen out on its own it can simply be peeled out. It is lightly attached like a sticker on the top three tabs. The left most table is labeled “B”, the center tab is blank, and the right tab is labeled “N”.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 7 other contributors 


                    kristie

Member since: 10/23/2013

538 Reputation

                                      5 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges

Team

                       UMass Dartmouth, Team 2-1, Gulbrandsen Fall 2013                        

                                                  Member of UMass Dartmouth, Team 2-1, Gulbrandsen Fall 2013 



                    UMASSD-GULBRANDSEN-F13S2G1                     


                                            4 Members                     


                                            10 Guides authored