Difficulty

Moderate

Steps

8

Time Required

                          7 - 10 minutes            

Sections

4

  • Battery
  • 2 steps
  • Volume Buttons
  • 3 steps
  • Speaker
  • 1 step
  • Rear Facing Camera
  • 2 steps

Flags

0

  • BackLG Motion 4G MS770

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Remove the phone's back cover.               
  • Use a plastic opening tool to remove the back cover.

Use a plastic opening tool to remove the back cover.

1024

Step 2

              Remove the battery.               
  • Use a plastic opening tool to remove the battery, lifting from the bottom right corner.

Use a plastic opening tool to remove the battery, lifting from the bottom right corner.

Step 3

              Remove screws.               
  • Use a Phillips #00 Screwdriver to remove all eight 4mm screws.

Use a Phillips #00 Screwdriver to remove all eight 4mm screws.

Step 4

  • Use a plastic opening tool to remove the back trim by working around all of the edges.

Use a plastic opening tool to remove the back trim by working around all of the edges.

Step 5

  • Remove the volume buttons from the side.

Remove the volume buttons from the side.

Step 6

              Speaker               
  • Use a plastic opening tool to lift the speaker off by prying under the silver square as shown.
  • Note: There is a small tab underneath the speaker that will be lifted off when the speaker is removed.

Use a plastic opening tool to lift the speaker off by prying under the silver square as shown.

Note: There is a small tab underneath the speaker that will be lifted off when the speaker is removed.

Step 7

              Rear Facing Camera               
  • Pry slightly underneath the tab attached to the camera until it pops off.

Pry slightly underneath the tab attached to the camera until it pops off.

Step 8

  • Use tweezers to remove the camera, you will need to use some force as it is glued on.

Use tweezers to remove the camera, you will need to use some force as it is glued on.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 2 other contributors 

                    Zarna Patel                     

Member since: 10/08/2014

305 Reputation

                                      2 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges                           

Team

                       USF Tampa, Team 14-1, Leahy Fall 2014                        

                                                  Member of USF Tampa, Team 14-1, Leahy Fall 2014 



                    USFT-LEAHY-F14S14G1                     


                                            3 Members                     


                                            10 Guides authored