Difficulty
Moderate
Steps
8
Time Required
10 minutes
Sections
4
- Back Cover
- 1 step
- Battery
- 2 steps
- Internal Back Cover
- 2 steps
- Motherboard
- 3 steps
Flags
1
Action Shots
Be an action hero! This guide needs images that better demonstrate how to perform specific actions.
BackLG LX150
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Back Cover
- First locate the button and the bottom of the cover where the arrow is. Press down on the button.
- While pushing down on the button, slide the cover up towards the hinge until the cover comes off.
- The battery will be visible after removing the back cover.
First locate the button and the bottom of the cover where the arrow is. Press down on the button.
While pushing down on the button, slide the cover up towards the hinge until the cover comes off.
The battery will be visible after removing the back cover.
1024
Step 2
Battery
- Simultaneously push the battery forward and pull up from the bottom.
Simultaneously push the battery forward and pull up from the bottom.
Step 3
- Once the battery is loose it can be easily removed. The phone’s ID tag will be visible once the battery is removed.
- Be careful of damaged or leaking batteries. If your battery appears damaged, remove it with care and find a replacement.
Once the battery is loose it can be easily removed. The phone’s ID tag will be visible once the battery is removed.
Be careful of damaged or leaking batteries. If your battery appears damaged, remove it with care and find a replacement.
Step 4
Internal Back Cover
- Remove the 7 phillips screws indicated by the red arrows using the phillips #0 screwdriver.
- Insert the flat end of the spudger in-between the black and blue phone casing on the side of the phone and split the the blue and black apart. Work your way around the perimeter of the cover, loosening all corners.
Remove the 7 phillips screws indicated by the red arrows using the phillips #0 screwdriver.
Insert the flat end of the spudger in-between the black and blue phone casing on the side of the phone and split the the blue and black apart. Work your way around the perimeter of the cover, loosening all corners.
Step 5
- Remove the internal back cover after loosening all the corners.
- The second picture below is what you will see after removing the internal back cover.
Remove the internal back cover after loosening all the corners.
The second picture below is what you will see after removing the internal back cover.
Step 6
Motherboard
- Lift the motherboard from the bottom to loosen it.
Lift the motherboard from the bottom to loosen it.
Step 7
- Remove the pin socket that connects the screen to the motherboard by pulling up away from the motherboard.
Remove the pin socket that connects the screen to the motherboard by pulling up away from the motherboard.
Step 8
- Remove the motherboard.
- The keypad will now be visible, as shown in the second picture.
Remove the motherboard.
The keypad will now be visible, as shown in the second picture.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 6 other contributors
Daniel Simpson
Member since: 04/18/2010
60 Reputation
2 Guides authored
Badges:
7
+4 more badges
Team
Cal Poly, Team 10-44, Garner Spring 2010
Member of Cal Poly, Team 10-44, Garner Spring 2010
CPSU-GARNER-S10S10G44
4 Members
18 Guides authored
