Difficulty

Moderate

Steps

5

Time Required

                          5 minutes            

Sections

3

  • Back Cover
  • 1 step
  • Battery
  • 2 steps
  • Internal Back Cover
  • 2 steps

Flags

0

  • BackLG LX150

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Back Cover               
  • First locate the button and the bottom of the cover where the arrow is. Press down on the button.
  • While pushing down on the button, slide the cover up towards the hinge until the cover comes off.
  • The battery will be visible after removing the back cover.

First locate the button and the bottom of the cover where the arrow is. Press down on the button.

While pushing down on the button, slide the cover up towards the hinge until the cover comes off.

The battery will be visible after removing the back cover.

1024

Step 2

              Battery               
  • Simultaneously push the battery forward and pull up from the bottom.

Simultaneously push the battery forward and pull up from the bottom.

Step 3

  • Once the battery is loose it can be easily removed. The phone’s ID tag will be visible once the battery is removed.
  • Be careful of damaged or leaking batteries. If your battery appears damaged, remove it with care and find a replacement.

Once the battery is loose it can be easily removed. The phone’s ID tag will be visible once the battery is removed.

Be careful of damaged or leaking batteries. If your battery appears damaged, remove it with care and find a replacement.

Step 4

              Internal Back Cover               
  • Remove the 7 phillips screws indicated by the red arrows using the phillips #0 screwdriver.
  • Insert the flat end of the spudger in-between the black and blue phone casing on the side of the phone and split the the blue and black apart. Work your way around the perimeter of the cover, loosening all corners.

Remove the 7 phillips screws indicated by the red arrows using the phillips #0 screwdriver.

Insert the flat end of the spudger in-between the black and blue phone casing on the side of the phone and split the the blue and black apart. Work your way around the perimeter of the cover, loosening all corners.

Step 5

  • Remove the internal back cover after loosening all the corners.
  • The second picture below is what you will see after removing the internal back cover.

Remove the internal back cover after loosening all the corners.

The second picture below is what you will see after removing the internal back cover.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 7 other contributors 

                    Daniel Simpson                     

Member since: 04/18/2010

60 Reputation

                                      2 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges                           

Team

                       Cal Poly, Team 10-44, Garner Spring 2010                        

                                                  Member of Cal Poly, Team 10-44, Garner Spring 2010 



                    CPSU-GARNER-S10S10G44                     


                                            4 Members                     


                                            18 Guides authored