Difficulty

Moderate

Steps

9

Time Required

                          15 - 20 minutes

Sections

2

  • Battery
  • 3 steps
  • Headphone Jack
  • 6 steps

Flags

0

  • BackLG Lucid 4G

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Turn off the phone by pressing the power button, then press “Power Off”, then press “OK” when notified that your phone will shut down.

Turn off the phone by pressing the power button, then press “Power Off”, then press “OK” when notified that your phone will shut down.

1024

Step 2

  • Flip the phone so that its back plate is facing upward.
  • Use your fingernail or prying tool to lift the back plate of the phone open by using the notch at the bottom.

Flip the phone so that its back plate is facing upward.

Use your fingernail or prying tool to lift the back plate of the phone open by using the notch at the bottom.

Step 3

  • Using the notch located near the bottom center, remove the battery with a prying tool or your fingernail.

Using the notch located near the bottom center, remove the battery with a prying tool or your fingernail.

Step 4

              Headphone Jack
  • Remove the 7 ph000 screws found on the back of the phone.

Remove the 7 ph000 screws found on the back of the phone.

Step 5

  • Once all the screws are removed, use a plastic opening tool to lift off the plastic cover. There are notches on the left side by the micro SD port.
  • It may be difficult to pry the plastic over off. You may need to use some force.

Once all the screws are removed, use a plastic opening tool to lift off the plastic cover. There are notches on the left side by the micro SD port.

It may be difficult to pry the plastic over off. You may need to use some force.

Step 6

  • Next, remove another screw located in top left quadrant of phone.

Next, remove another screw located in top left quadrant of phone.

Step 7

  • Remove SIM card holding by prying it with opening tool. As you are lifting it, disconnect the ribbon that is connecting the sim card holding and the rest of the phone.

Remove SIM card holding by prying it with opening tool. As you are lifting it, disconnect the ribbon that is connecting the sim card holding and the rest of the phone.

Step 8

  • Disconnect the 5 ribbon cables connected to the motherboard.
  • Remove the motherboard.

Disconnect the 5 ribbon cables connected to the motherboard.

Remove the motherboard.

Step 9

  • Lift the additional ribbon in the top right quadrant.
  • Once that ribbon is lifted, the audio jack can easily be removed.

Lift the additional ribbon in the top right quadrant.

Once that ribbon is lifted, the audio jack can easily be removed.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    Will Bonner

Member since: 02/07/2017

101 Reputation

                                      1 Guide authored                  



                       Badges:
                       3

Team

                       Ohio State, Team 1-1, Wilder Spring 2017                        

                                                  Member of Ohio State, Team 1-1, Wilder Spring 2017 



                    OSU-WILDER-S17S1G1                     


                                            4 Members                     


                                            8 Guides authored