Difficulty
Easy
Steps
7
Time Required
15 minutes
Sections
2
- Battery
- 5 steps
- Front-Facing Camera
- 2 steps
Flags
0
BackLG K30
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
This is a relatively easy fix, but please be sure to go slow and steady when replacing the front-facing camera so that you do not accidentally tear any of the wires or damage the connecting points.
What you need
Step 1
Battery
- Before disassembling your LG K30, discharge the battery below 25%. A charged lithium-ion battery can catch fire and/or explode if accidentally punctured.
- Power off your Phone before beginning disassembly.
- Use the ‘Jimmy’ and ‘Metal Spudger’ to slowly pry open the outsides of the back case.
Before disassembling your LG K30, discharge the battery below 25%. A charged lithium-ion battery can catch fire and/or explode if accidentally punctured.
Power off your Phone before beginning disassembly.
Use the ‘Jimmy’ and ‘Metal Spudger’ to slowly pry open the outsides of the back case.
1024
Step 2
- Remove the thirteen 3.4 mm Phillips #00 screws securing the midframe to the display assembly.
Remove the thirteen 3.4 mm Phillips #00 screws securing the midframe to the display assembly.
Step 3
- Use a metal spudger or plastic opening tool to pry open the outer cover.
Use a metal spudger or plastic opening tool to pry open the outer cover.
Step 4
- Use the flat end of a spudger to detach the battery connector from the logic board.
Use the flat end of a spudger to detach the battery connector from the logic board.
Step 5
- Use a spudger to pry the battery from the phone.
- There may be an adhesive on the back of the battery and the phone. Pry the battery gently to prevent puncture or damage.
- Do not bend or puncture the battery.
Use a spudger to pry the battery from the phone.
There may be an adhesive on the back of the battery and the phone. Pry the battery gently to prevent puncture or damage.
Do not bend or puncture the battery.
Step 6
Front-Facing Camera
- Use the plastic spudger to disconnect the cable connector.
Use the plastic spudger to disconnect the cable connector.
Step 7
- Gently pry out the front-facing camera from the device.
Gently pry out the front-facing camera from the device.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 3 other contributors
Alisha Lee
Member since: 09/19/2019
277 Reputation
3 Guides authored
Badges:
8
+5 more badges
Team
University of North Alabama, Team S1-G1, Winner Fall 2019
Member of University of North Alabama, Team S1-G1, Winner Fall 2019
UNA-WINNER-F19S1G1
4 Members
6 Guides authored