Difficulty
Difficult
Steps
9
Time Required
25 minutes - 1 hour
Sections
3
- Battery
- 5 steps
- Motherboard
- 2 steps
- Charging Port
- 2 steps
Flags
0
BackLG K30
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
Rather than buying a new phone because it will no longer charge, you can use this guide to replace the charging port. Please be sure to use caution when working with the soldering iron, as it can get very hot.
What you need
Step 1
Battery
- Before disassembling your LG K30, discharge the battery below 25%. A charged lithium-ion battery can catch fire and/or explode if accidentally punctured.
- Power off your Phone before beginning disassembly.
- Use the ‘Jimmy’ and ‘Metal Spudger’ to slowly pry open the outsides of the back case.
Before disassembling your LG K30, discharge the battery below 25%. A charged lithium-ion battery can catch fire and/or explode if accidentally punctured.
Power off your Phone before beginning disassembly.
Use the ‘Jimmy’ and ‘Metal Spudger’ to slowly pry open the outsides of the back case.
1024
Step 2
- Remove the thirteen 3.4 mm Phillips #00 screws securing the midframe to the display assembly.
Remove the thirteen 3.4 mm Phillips #00 screws securing the midframe to the display assembly.
Step 3
- Use a metal spudger or plastic opening tool to pry open the outer cover.
Use a metal spudger or plastic opening tool to pry open the outer cover.
Step 4
- Use the flat end of a spudger to detach the battery connector from the logic board.
Use the flat end of a spudger to detach the battery connector from the logic board.
Step 5
- Use a spudger to pry the battery from the phone.
- There may be an adhesive on the back of the battery and the phone. Pry the battery gently to prevent puncture or damage.
- Do not bend or puncture the battery.
Use a spudger to pry the battery from the phone.
There may be an adhesive on the back of the battery and the phone. Pry the battery gently to prevent puncture or damage.
Do not bend or puncture the battery.
Step 6
Motherboard
- Use a spudger to carefully disconnect the front camera connector.
- Use a spudger to disconnect the display cable connector.
Use a spudger to carefully disconnect the front camera connector.
Use a spudger to disconnect the display cable connector.
Step 7
- Remove the motherboard assembly from the display assembly with the a spudger or hand.
Remove the motherboard assembly from the display assembly with the a spudger or hand.
Step 8
Charging Port
- For a guide on how to solder and unsolder components; please refer to: How To Solder and Desolder Connections
- Peel back gold plastic protective film on motherboard to reveal 4 solder points which need to be desoldered with the desoldering wick.
- Use extreme caution: soldering iron can become extremely hot and cause burns.
For a guide on how to solder and unsolder components; please refer to: How To Solder and Desolder Connections
Peel back gold plastic protective film on motherboard to reveal 4 solder points which need to be desoldered with the desoldering wick.
Use extreme caution: soldering iron can become extremely hot and cause burns.
Step 9
- Flip the motherboard over to the backside and use soldering iron to melt the solder on the charging port terminals; use the desoldering wick to remove the solder.
Flip the motherboard over to the backside and use soldering iron to melt the solder on the charging port terminals; use the desoldering wick to remove the solder.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 3 other contributors
Alisha Lee
Member since: 09/19/2019
277 Reputation
3 Guides authored
Badges:
8
+5 more badges
Team
University of North Alabama, Team S1-G1, Winner Fall 2019
Member of University of North Alabama, Team S1-G1, Winner Fall 2019
UNA-WINNER-F19S1G1
4 Members
6 Guides authored
Daisey Flowerr - Sep 5, 2020
Reply
Is the K30 the same inside as the K40?