Difficulty
Easy
Steps
6
Time Required
5 minutes
Sections
1
- Battery
- 6 steps
Flags
0
BackLG Intuition
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Turn the device so the two bottom screws are shown.
Turn the device so the two bottom screws are shown.
1024
Step 2
- Remove the two 7mm screws holding the back panel of the phone using the P5 bit and magnetic driver.
Remove the two 7mm screws holding the back panel of the phone using the P5 bit and magnetic driver.
Step 3
- Carefully use the plastic opening tool to pry the back panel of the phone from the front screen. This will expose the battery and other parts.
Carefully use the plastic opening tool to pry the back panel of the phone from the front screen. This will expose the battery and other parts.
Step 4
- Use the Phillips #0 screwdriver to remove the 5mm screw holding the metal bracket that protects the battery’s ribbon cable.
Use the Phillips #0 screwdriver to remove the 5mm screw holding the metal bracket that protects the battery’s ribbon cable.
Step 5
- Carefully use the plastic opening tool to pry the ribbon cable connecting the battery to the motherboard of the phone.
Carefully use the plastic opening tool to pry the ribbon cable connecting the battery to the motherboard of the phone.
Step 6
- Gently raise the battery from its compartment.
Gently raise the battery from its compartment.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Thomas Morrissey
Member since: 10/25/2018
589 Reputation
6 Guides authored
Badges:
4
+1 more badge
Team
UMass Dartmouth, Team S3-G4, Peak Fall 2018
Member of UMass Dartmouth, Team S3-G4, Peak Fall 2018
UMASSD-PEAK-F18S3G4
3 Members
6 Guides authored
