Difficulty

Moderate

Steps

11

Time Required

                          10 minutes

Sections

2

  • Motherboard
  • 7 steps
  • Keyboard
  • 4 steps

Flags

0

  • BackLG GW910

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Motherboard
  • Remove the back cover by firmly pressing the triangle and push upwards.
  • Lift the bottom section to remove the cover.

Remove the back cover by firmly pressing the triangle and push upwards.

Lift the bottom section to remove the cover.

1024

Step 2

  • Remove the battery by lifting from the bottom.

Remove the battery by lifting from the bottom.

Step 3

  • Remove six 3mm PH000 screws.

Remove six 3mm PH000 screws.

Step 4

  • Peel off the sticker with the metal spudger.
  • Remove one 1mm PH000 screw.

Peel off the sticker with the metal spudger.

Remove one 1mm PH000 screw.

Step 5

  • Pry open all four sides of the back-frame gently, using the metal spudger.
  • The back-frame should come out easily.
  • Volume button and shutter button may fall out during the process.

Pry open all four sides of the back-frame gently, using the metal spudger.

The back-frame should come out easily.

Volume button and shutter button may fall out during the process.

Step 6

  • Pry off the connector using the iFixit opening tool to remove the communication board.

Pry off the connector using the iFixit opening tool to remove the communication board.

Step 7

  • Pry off the connectors using the iFixit opening tool.
  • Disconnect the antenna using the iFixit opening tool.
  • The motherboard should be able to be removed easily.

Pry off the connectors using the iFixit opening tool.

Disconnect the antenna using the iFixit opening tool.

The motherboard should be able to be removed easily.

Step 8

              Keyboard
  • Remove six 1mm PH00 screws.

Remove six 1mm PH00 screws.

Step 9

  • Peel off the tape to expose the hidden screw.
  • Remove one 1mm PH000 screw.
  • Replacement tape might be needed.

Peel off the tape to expose the hidden screw.

Replacement tape might be needed.

Step 10

  • Pry off the board from the side using the metal spudger tool.
  • Disconnect the antenna.

Pry off the board from the side using the metal spudger tool.

Disconnect the antenna.

Step 11

  • Remove the keyboard assembly from the main frame.
  • The keyboard cover is loose.
  • Make sure to pull the small keyboard battery out with the whole assembly

Remove the keyboard assembly from the main frame.

The keyboard cover is loose.

Make sure to pull the small keyboard battery out with the whole assembly

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 3 other contributors 


                    Jonas Ke

Member since: 11/06/2018

492 Reputation

                                      3 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges

Team

                       IUPUI, Team S1-G6, Hovde Fall 2018                        

                                                  Member of IUPUI, Team S1-G6, Hovde Fall 2018 



                    IUPUI-HOVDE-F18S1G6                     


                                            3 Members                     


                                            6 Guides authored