Difficulty
Very easy
Steps
5
Time Required
1 minute
Sections
4
- SIM Card
- 1 step
- Back Cover
- 1 step
- Speaker System
- 2 steps
- Motherboard
- 1 step
Flags
3
Action Shots
Be an action hero! This guide needs images that better demonstrate how to perform specific actions.
Needs Better Images
Better photos will improve this guide. Help out by taking, editing, or uploading new ones!
Missed a Step
Oops! This guide is currently missing some important steps.
BackLG G7 ThinQ
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
The motherboard is the main component of the phone. It may also be called the main board and it controls everything in the phone. It is what sends all the communications to the parts of the phone that need to be used for a specific task. A faulty motherboard can cause all kinds of issues including power issues and screen malfunction.
Before beginning, make sure the phone is powered off and is disconnected from any source of power.
What you need
Step 1
SIM Card
- Insert a SIM card eject tool into the hole in the SIM card slot on the top right of the phone.
- After the SIM card tray is ejected, remove the SIM card tray from the phone.
- Remove the SIM card from the tray.
Insert a SIM card eject tool into the hole in the SIM card slot on the top right of the phone.
After the SIM card tray is ejected, remove the SIM card tray from the phone.
Remove the SIM card from the tray.
1024
Step 2
Back Cover
- Place the phone so the back cover is facing upwards.
- Insert the opening picks one by one onto each side with equal pressure.
- There is extra adhesive at the top near the cameras. You need to loosen the adhesive there to open the case.
- If the picks are too thick to fit in, you can use the Jimmy to start the process.
- Use the pick with the best leverage to pry the back cover away from the phone.
Place the phone so the back cover is facing upwards.
Insert the opening picks one by one onto each side with equal pressure.
There is extra adhesive at the top near the cameras. You need to loosen the adhesive there to open the case.
If the picks are too thick to fit in, you can use the Jimmy to start the process.
Use the pick with the best leverage to pry the back cover away from the phone.
Step 3
Speaker System
- This device did not come with a midframe, but if yours does, follow the instructions in the teardown video to remove it.
- Remove the screws along the perimeter and central area of the phone using a Phillips #000 screwdriver.
This device did not come with a midframe, but if yours does, follow the instructions in the teardown video to remove it.
Remove the screws along the perimeter and central area of the phone using a Phillips #000 screwdriver.
Step 4
Remove the speaker system
- Use your fingers or tweezers to remove the speaker system.
Use your fingers or tweezers to remove the speaker system.
Step 5
Motherboard
- Make sure the motherboard is fully disconnected from the battery.
- Use your fingers or tweezers to remove the motherboard.
Make sure the motherboard is fully disconnected from the battery.
Use your fingers or tweezers to remove the motherboard.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 3 other contributors
Alivia Catey
Member since: 01/14/2021
592 Reputation
5 Guides authored
Badges:
11
+8 more badges
Team
Illinois Wesleyan University, Team S1-G1, Bullock Spring 2021
Member of Illinois Wesleyan University, Team S1-G1, Bullock Spring 2021
IWU-BULLOCK-S21S1G1
4 Members
10 Guides authored
