Difficulty

Moderate

Steps

10

Time Required

                          7 - 10 minutes

Sections

2

  • Battery
  • 3 steps
  • Charging Dock
  • 7 steps

Flags

0

  • BackLG G Vista

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Make sure the device is powered off.

Make sure the device is powered off.

1024

Step 2

  • Remove the back cover by gently prying open the case of the device from the charging port.

Remove the back cover by gently prying open the case of the device from the charging port.

Step 3

  • Lift the battery out of its place by prying up from the small notch at the base of the battery.

Lift the battery out of its place by prying up from the small notch at the base of the battery.

Step 4

              Charging Dock
  • Using a Phillips #000 screwdriver, remove the eleven 3.0 mm screws around the perimeter of the phone.

Using a Phillips #000 screwdriver, remove the eleven 3.0 mm screws around the perimeter of the phone.

Step 5

  • Use a plastic spudger, or finger nail, to lift up the hard shell on the top of the phone.

Use a plastic spudger, or finger nail, to lift up the hard shell on the top of the phone.

Step 6

  • Use a Phillips #000 screwdriver to remove the five 3.0 mm screws.
  • Remove the bottom hard shell from the device.

Use a Phillips #000 screwdriver to remove the five 3.0 mm screws.

Remove the bottom hard shell from the device.

Step 7

  • Using a Phillips #000 screwdriver, remove the two screws from the device.

Using a Phillips #000 screwdriver, remove the two screws from the device.

Step 8

  • Using a pair of tweezers, lift up the two antennas surrounding the battery.

Using a pair of tweezers, lift up the two antennas surrounding the battery.

Step 9

  • Disconnect the two connectors on the right side of the charging port.

Disconnect the two connectors on the right side of the charging port.

Step 10

  • Lift up the charging port with the plastic opening tool.
  • Remove the charging port from the device.

Lift up the charging port with the plastic opening tool.

Remove the charging port from the device.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 3 other contributors 


                    Key Baker

Member since: 01/18/2018

754 Reputation

                                      5 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       Eastern Washington University, Team S2-G1, Munoz Winter 2018                        

                                                  Member of Eastern Washington University, Team S2-G1, Munoz Winter 2018 



                    EWU-MUNOZ-W18S2G1                     


                                            5 Members                     


                                            10 Guides authored