Difficulty
Moderate
Steps
5
Time Required
10 minutes
Sections
2
- Battery
- 2 steps
- Speaker
- 3 steps
Flags
0
BackLG G Stylo
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Make sure that you power off the phone before beginning.
- Remove the back cover by placing the plastic opening tool on the bottom left side of the device and gently prying up.
- There is a small slit that fits the plastic opening tool perfectly on the left side.
Make sure that you power off the phone before beginning.
Remove the back cover by placing the plastic opening tool on the bottom left side of the device and gently prying up.
There is a small slit that fits the plastic opening tool perfectly on the left side.
1024
Step 2
- Insert the plastic opening tool into the indent at the bottom of the battery and lift up. Fully remove the battery with your fingers.
Insert the plastic opening tool into the indent at the bottom of the battery and lift up. Fully remove the battery with your fingers.
Step 3
Speaker
- Carefully use the 3.9mm Phillips #00 screwdriver to remove the eleven visible screws found on the back. The screws to be removed are marked with the given indicators.
Carefully use the 3.9mm Phillips #00 screwdriver to remove the eleven visible screws found on the back. The screws to be removed are marked with the given indicators.
Step 4
- When you have finished removing all of the screws, place the plastic opening tool in the groove at the bottom left corner of the motherboard cover and lift up.
- This part could be more difficult if you have never removed the motherboard cover. If difficulty arises, pry the plastic opening tool into each groove along the edge of the motherboard cover until it releases.
- Once a clip is released, you can detach the motherboard cover with your fingers and set aside.
When you have finished removing all of the screws, place the plastic opening tool in the groove at the bottom left corner of the motherboard cover and lift up.
This part could be more difficult if you have never removed the motherboard cover. If difficulty arises, pry the plastic opening tool into each groove along the edge of the motherboard cover until it releases.
Once a clip is released, you can detach the motherboard cover with your fingers and set aside.
Step 5
- Once you have the plastic back cover exposed you can detach the speaker
- Indicated on the back panel is where you will use your plastic prying tool to remove the top part from the speaker.
- The bottom part of the plastic panel contains the speaker which should be placed all as one part.
Once you have the plastic back cover exposed you can detach the speaker
Indicated on the back panel is where you will use your plastic prying tool to remove the top part from the speaker.
The bottom part of the plastic panel contains the speaker which should be placed all as one part.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
6 other people completed this guide.
Author
with 2 other contributors
Kimberly Young
Member since: 02/09/2016
758 Reputation
3 Guides authored
Badges:
18
+15 more badges
Team
USF Tampa, Team 11-7, Cheng Spring 2016
Member of USF Tampa, Team 11-7, Cheng Spring 2016
USFT-CHENG-S16S11G7
4 Members
14 Guides authored