Difficulty

Easy

Steps

3

Time Required

                          15 minutes            

Sections

1

  • Rear Camera
  • 3 steps

Flags

0

  • BackLG G Pad F 7.0

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Rear Camera               
  • Open up the SIM port, on the top right corner (screen face down).
  • Press the SIM card (white plastic) to pop it out
  • Remove SIM card and set aside

Open up the SIM port, on the top right corner (screen face down).

Press the SIM card (white plastic) to pop it out

Remove SIM card and set aside

1024

Step 2

  • Use the plastic opening tool to pry the plastic backing off of the internal block. Start at the location with the SIM port to avoid damage to internal components.
  • Do this by finding the seam between the edge of the screen and the plastic backing, and prying between the two.
  • Work your way all the way around the edge of the screen, and remove the plastic backing when it is loose.

Use the plastic opening tool to pry the plastic backing off of the internal block. Start at the location with the SIM port to avoid damage to internal components.

Do this by finding the seam between the edge of the screen and the plastic backing, and prying between the two.

Work your way all the way around the edge of the screen, and remove the plastic backing when it is loose.

Step 3

  • Use the plastic opening tool to pry up the ribbon cable connecting to the camera unit.
  • One the ribbon cable has been detached, use the tweezers to pull up the camera. It is attached with adhesive so pull up gently to remove it.
  • Once the old camera unit is removed, replace with new unit and reassemble in reverse order of guide.

Use the plastic opening tool to pry up the ribbon cable connecting to the camera unit.

One the ribbon cable has been detached, use the tweezers to pull up the camera. It is attached with adhesive so pull up gently to remove it.

Once the old camera unit is removed, replace with new unit and reassemble in reverse order of guide.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 

                    Matt Kloos                     

Member since: 01/25/2017

249 Reputation

                                      2 Guides authored                  



                       Badges:
                       5







                                                        +2 more badges                           

Team

                       Cal Poly, Team 8-5, Banghart Winter 2017                        

                                                  Member of Cal Poly, Team 8-5, Banghart Winter 2017 



                    CPSU-BANGHART-W17S8G5                     


                                            3 Members                     


                                            10 Guides authored                     

Jonah Basl - Mar 10, 2017

Reply

There are multiple spelling errors throughout the guide

Matt Kloos - Mar 11, 2017

Where? I reread and didn’t find any.