Difficulty

Easy

Steps

4

Time Required

                          20 minutes            

Sections

1

  • Battery
  • 4 steps

Flags

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackLG G Pad F 7.0

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Battery               
  • Open up the SIM port, on the top right corner (screen face down).
  • Press the SIM card (white plastic) to pop it out.
  • Remove SIM card and set aside.

Open up the SIM port, on the top right corner (screen face down).

Press the SIM card (white plastic) to pop it out.

Remove SIM card and set aside.

1024

Step 2

  • Use the plastic opening tool to pry the plastic backing off of the internal block. Start at the location with the SIM port to avoid damage to internal components.
  • Do this by finding the seam between the edge of the screen and the plastic backing, and prying between the two.
  • Work your way all the way around the edge of the screen, and remove the plastic backing when it is loose.

Use the plastic opening tool to pry the plastic backing off of the internal block. Start at the location with the SIM port to avoid damage to internal components.

Do this by finding the seam between the edge of the screen and the plastic backing, and prying between the two.

Work your way all the way around the edge of the screen, and remove the plastic backing when it is loose.

Step 3

  • Locate the large orange ribbon cable, pry off the side shown in the image.

Locate the large orange ribbon cable, pry off the side shown in the image.

Step 4

  • Use the plastic opening tool to pry the multicolor wire cables off, applying force up away from the tablet.
  • Use the plastic opening tool to pry up the battery. There is adhesive underneath the battery, so use a small amount of force. Work your way around the edge of the battery to pry it off.

Use the plastic opening tool to pry the multicolor wire cables off, applying force up away from the tablet.

Use the plastic opening tool to pry up the battery. There is adhesive underneath the battery, so use a small amount of force. Work your way around the edge of the battery to pry it off.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 

                    Matt Kloos                     

Member since: 01/25/2017

249 Reputation

                                      2 Guides authored                  



                       Badges:
                       5







                                                        +2 more badges                           

Team

                       Cal Poly, Team 8-5, Banghart Winter 2017                        

                                                  Member of Cal Poly, Team 8-5, Banghart Winter 2017 



                    CPSU-BANGHART-W17S8G5                     


                                            3 Members                     


                                            10 Guides authored                     

Jonah Basl - Mar 10, 2017

Reply

Pictures are all in focus and easy to follow