Difficulty
Easy
Steps
4
Time Required
10 minutes
Sections
2
- Back Panel
- 3 steps
- Volume Control Buttons
- 1 step
Flags
1
Missed a Step
Oops! This guide is currently missing some important steps.
BackLG G Pad 8.3
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Back Panel
- With the tablet face down, pull the SD card slot cover out.
- Using a Phillips #000 screwdriver, remove the 3mm screw located in the SD card slot.
With the tablet face down, pull the SD card slot cover out.
Using a Phillips #000 screwdriver, remove the 3mm screw located in the SD card slot.
1024
Step 2
- Insert a plastic opening tool in the small crevasse between the screen and the back panel.
- Pry the screen away from the back panel.
- Repeat this on each edge of the device.
- We found it helpful to leave multiple plastic opening tools wedged in the crevasse to prevent it from closing.
- This requires heavy force. The back of the device is attached with an adhesive. If the back panel is too hard to remove, use the iOpener.
Insert a plastic opening tool in the small crevasse between the screen and the back panel.
Pry the screen away from the back panel.
Repeat this on each edge of the device.
We found it helpful to leave multiple plastic opening tools wedged in the crevasse to prevent it from closing.
This requires heavy force. The back of the device is attached with an adhesive. If the back panel is too hard to remove, use the iOpener.
Step 3
- After using the plastic opening tools, pry the device open with your hands.
- Remove the back panel from the screen.
After using the plastic opening tools, pry the device open with your hands.
Remove the back panel from the screen.
Step 4
Volume Control Buttons
- With the screen facing towards you and the top of the tablet towards your left, locate the volume buttons on the left side.
- Using a spudger or your hands, remove the volume control buttons, which are attached with adhesive.
With the screen facing towards you and the top of the tablet towards your left, locate the volume buttons on the left side.
Using a spudger or your hands, remove the volume control buttons, which are attached with adhesive.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 4 other contributors
Mario Salguero
Member since: 09/14/2015
781 Reputation
6 Guides authored
Badges:
17
+14 more badges
Team
CSU Fullerton, Team 1-6, Bruce Fall 2015
Member of CSU Fullerton, Team 1-6, Bruce Fall 2015
CSUF-BRUCE-F15S1G6
4 Members
14 Guides authored