Difficulty
Easy
Steps
6
Time Required
5 minutes
Sections
2
- Back Panel
- 2 steps
- Speakers
- 4 steps
Flags
1
Better Introduction
Improve this guide by completing or revising its introduction.
BackLG G Pad 8.3 4G
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Back Panel
- With the screen faced up, insert the metal spudger into the crevice so that it is sticking out between the side panel and the screen.
- Be gentle when popping the panel off.
With the screen faced up, insert the metal spudger into the crevice so that it is sticking out between the side panel and the screen.
Be gentle when popping the panel off.
1024
Step 2
- Take the spudger and slide it around the perimeter of the device.
- Pull gently on the edges to get the panel to pop up.
- If the panel does not budge, be aware that there is adhesive on the back of the battery holding the back shut. Make sure to just move around the perimeter of the back panel until the panel is able to lift forward.
Take the spudger and slide it around the perimeter of the device.
Pull gently on the edges to get the panel to pop up.
If the panel does not budge, be aware that there is adhesive on the back of the battery holding the back shut. Make sure to just move around the perimeter of the back panel until the panel is able to lift forward.
Step 3
Speakers
- Remove the 4 1.5 mm screws holding the speakers in place.
Remove the 4 1.5 mm screws holding the speakers in place.
Step 4
- Put the spudger underneath the gold cap of the cable and lift to disconnect from device.
- This cable can be damaged easily.
Put the spudger underneath the gold cap of the cable and lift to disconnect from device.
This cable can be damaged easily.
Step 5
- Pull the cable back and out of the way of the speaker.
Pull the cable back and out of the way of the speaker.
Step 6
- Place the spudger in between the speaker and the device to pop the speaker out of place.
- Pull the speaker out of the device.
Place the spudger in between the speaker and the device to pop the speaker out of place.
Pull the speaker out of the device.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Deja Morrow
Member since: 09/18/2018
109 Reputation
1 Guide authored
Badges:
2
Team
University of North Texas, Team S4-G3, Raign Fall 2018
Member of University of North Texas, Team S4-G3, Raign Fall 2018
UNT-RAIGN-F18S4G3
4 Members
5 Guides authored