Lg Fortune Rear Camera Replacement Repair Guide

Difficulty

Moderate

Steps

8

Time Required

                          25 minutes            

Sections

3

• Battery
• 2 steps
• Motherboard
• 5 steps
• Rear Camera
• 1 step

Flags

5

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

Incorrect Tools

Help make this guide better by using the correct tools in images and/or text.

Needs More Images

A few more images would make this guide’s procedures crystal clear.

Better Introduction

Improve this guide by completing or revising its introduction.

• BackLG Fortune

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Battery               

• Use the slit on the bottom right side of the phone to open the back cover of your phone.
• It will be the bottom left of the phone if looking at it from the back.
• Slowly pry the back cover off the phone starting from the bottom up to the top.

Use the slit on the bottom right side of the phone to open the back cover of your phone.

It will be the bottom left of the phone if looking at it from the back.

Slowly pry the back cover off the phone starting from the bottom up to the top.

1024

Step 2

• Use the slot in the middle of the bottom edge of the battery to pry it up and out of the case.

Use the slot in the middle of the bottom edge of the battery to pry it up and out of the case.

Step 3

              Motherboard               

• Using a PH000 screwdriver, remove the ten 4mm screws on the back panelling.
• Remove the back panelling from the device with your fingers or a spudger.
• Work slowly side to side to release this back casing and expose the motherboard.

Using a PH000 screwdriver, remove the ten 4mm screws on the back panelling.

Remove the back panelling from the device with your fingers or a spudger.

Work slowly side to side to release this back casing and expose the motherboard.

Step 4

• Unplug the video card from the motherboard with a spudger or plastic opening tool.
• Using the metal spudger as shown in the photos has the potential to damage your device.

Unplug the video card from the motherboard with a spudger or plastic opening tool.

Using the metal spudger as shown in the photos has the potential to damage your device.

Step 5

• Unplug the front facing camera press fit connector from the motherboard by prying upwards with a spudger or plastic opening tool.
• Using a metal spudger as shown in the photos could potentially damage your device.

Unplug the front facing camera press fit connector from the motherboard by prying upwards with a spudger or plastic opening tool.

Using a metal spudger as shown in the photos could potentially damage your device.

Step 6

• Unplug the rear facing camera ribbon cable from the motherboard by prying up the press fit connector with a spudger.
• Using a metal spudger as shown in the photos has the potential to damage your device. Choose an ESD safe tool instead.

Unplug the rear facing camera ribbon cable from the motherboard by prying up the press fit connector with a spudger.

Using a metal spudger as shown in the photos has the potential to damage your device. Choose an ESD safe tool instead.

Step 7

• Use the spudger to pry off the motherboard from the rest of the device on the top left corner down to the bottom right corner

Use the spudger to pry off the motherboard from the rest of the device on the top left corner down to the bottom right corner

Step 8

              Rear Camera               

• Unplug the camera from the phone using a metal spudger to get underneath the tape and remove the camera.
• This will require a bit of force. Don’t be afraid to apply the necessary amount to remove.

Unplug the camera from the phone using a metal spudger to get underneath the tape and remove the camera.

This will require a bit of force. Don’t be afraid to apply the necessary amount to remove.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 

                    Cori Johnson                     

Member since: 04/08/2019

531 Reputation

                                      5 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges                           

Team

                       Eastern Washington University, Team S1-G5, Rowley Spring 2019                        

                                                  Member of Eastern Washington University, Team S1-G5, Rowley Spring 2019 



                    EWU-ROWLEY-S19S1G5                     


                                            3 Members                     


                                            10 Guides authored