Difficulty
Difficult
Steps
3
Time Required
1 hour
Sections
1
- Main and Power Board Capacitors
- 3 steps
Flags
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackLG Flatron M228WA-BZ
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Opening the monitor
- Before you begin, be sure to unplug the device from the outlet.
- First of all, you need to unscrew the 4 screws holding the stand. After that the screws holding the back panel, they are located in the corners of the device).
- Second, you need to pry the plastic basel. There are several clips holding everything together.
Before you begin, be sure to unplug the device from the outlet.
First of all, you need to unscrew the 4 screws holding the stand. After that the screws holding the back panel, they are located in the corners of the device).
Second, you need to pry the plastic basel. There are several clips holding everything together.
1024
Step 2
The insides
- Disconnect all cables and release the module with the boards.
Disconnect all cables and release the module with the boards.
Step 3
Finding the problem
In my case I had to change the 6 capacitors marked in red.
You can always put higher voltage (V) rated capacitors (if you have the space), but dont change the farad (F) rating.
After putting everything back together, the monitor was working once again.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 1 other contributor
Simeon Brankov
Member since: 11/08/2020
3,455 Reputation
41 Guides authored
Badges:
17
+14 more badges