Difficulty

Easy

Steps

7

Time Required

                          10 minutes

Sections

3

  • Battery
  • 2 steps
  • Loudspeaker Assembly
  • 2 steps
  • Rear Camera
  • 3 steps

Flags

1

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackLG Escape P870

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Turn the device over and pull the back plastic cover off by inserting your fingernail into the opening at the bottom of the phone and gently pulling.

Turn the device over and pull the back plastic cover off by inserting your fingernail into the opening at the bottom of the phone and gently pulling.

1024

Step 2

  • With your finger and from the bottom edge, lift the battery out of the phone and set it aside.
  • You now have access to:
  • Your SD card
  • Your SIM card
  • Your device’s serial numbers

With your finger and from the bottom edge, lift the battery out of the phone and set it aside.

You now have access to:

Your SD card

Your SIM card

Your device’s serial numbers

Step 3

              Loudspeaker Assembly
  • Remove the 4 Phillips 00 screws securing the speaker assembly to the phone housing.

Remove the 4 Phillips 00 screws securing the speaker assembly to the phone housing.

Step 4

  • Carefully insert a small flathead screwdriver between the speaker assembly and the rear housing
  • Pry the speaker assembly out of the phone and set it aside

Carefully insert a small flathead screwdriver between the speaker assembly and the rear housing

Pry the speaker assembly out of the phone and set it aside

Step 5

              Rear Camera
  • Remove the remaining 6 screws securing the plastic frame to the back housing

Remove the remaining 6 screws securing the plastic frame to the back housing

Step 6

  • Insert a black plastic spudger or a small flathead screwdriver between the back silver bezel and the black area and begin prying the bezel away from the rest of the phone
  • Continue working your way around the phone, prying carefully with your prying tool
  • When you work the frame free, set it aside

Insert a black plastic spudger or a small flathead screwdriver between the back silver bezel and the black area and begin prying the bezel away from the rest of the phone

Continue working your way around the phone, prying carefully with your prying tool

When you work the frame free, set it aside

Step 7

  • Use a plastic spudger or safe-open pry tool to release the camera’s flex cable from its connector
  • Remove the camera from the housing and set it aside

Use a plastic spudger or safe-open pry tool to release the camera’s flex cable from its connector

Remove the camera from the housing and set it aside

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Brad

Member since: 08/12/2012

1,830 Reputation

                                      10 Guides authored                  



                       Badges:
                       21







                                                        +18 more badges