Difficulty

Moderate

Steps

8

Time Required

                          15 minutes

Sections

3

  • Battery
  • 3 steps
  • Volume and Camera Buttons
  • 3 steps
  • Motherboard
  • 2 steps

Flags

2

Inconsistent Images

Updating the images on this guide to be more consistent with the prerequisites would increase its awesomeness.

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

  • BackLG EnV Touch VX11000

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Turn the phone off.
  • Flip it over so the front screen is facing down.

Turn the phone off.

Flip it over so the front screen is facing down.

1024

Step 2

  • Slide the release latch down and toward you while lifting up on the left side of the battery cover.

Slide the release latch down and toward you while lifting up on the left side of the battery cover.

Step 3

  • Lift the edge of the battery to remove it.

Lift the edge of the battery to remove it.

Step 4

              Volume and Camera Buttons
  • Locate the three screw covers on the back of the phone. Using your fingernail (or a spudger, pry off screw covers.
  • Using a Phillips #000 Screwdriver, remove the 1.5mm #000 Phillips screws that were under the screw covers.

Locate the three screw covers on the back of the phone. Using your fingernail (or a spudger, pry off screw covers.

Using a Phillips #000 Screwdriver, remove the 1.5mm #000 Phillips screws that were under the screw covers.

Step 5

  • Locate the two inner 1.5mm #000 Phillips screws and remove them using a Phillips #000 screwdriver.

Locate the two inner 1.5mm #000 Phillips screws and remove them using a Phillips #000 screwdriver.

Step 6

  • Use a plastic opening tool or your fingernail to pry off the back case.
  • The camera and volume keys will fall off.

Use a plastic opening tool or your fingernail to pry off the back case.

The camera and volume keys will fall off.

Step 7

              Motherboard
  • Use your fingers to pull up on the tab in order to unplug it.

Use your fingers to pull up on the tab in order to unplug it.

Step 8

  • Using both of your hands, gently pry out the motherboard by pulling up on both ends.

Using both of your hands, gently pry out the motherboard by pulling up on both ends.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 3 other contributors 


                    Rachel Smith

Member since: 09/30/2013

578 Reputation

                                      5 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges

Team

                       Cal Poly, Team 13-2, Forte Fall 2013                        

                                                  Member of Cal Poly, Team 13-2, Forte Fall 2013 



                    CPSU-FORTE-F13S13G2                     


                                            4 Members                     


                                            10 Guides authored