Lg Electronics Gsl 361 Icez Side By Side Repair Of The Ice Cube Dispenser And Control Panel Repair Guide

Difficulty

Moderate

Steps

4

Time Required

                          20 - 40 minutes            

Sections

1

• LG Electronics GSL 361 ICEZ Side by Side repair of the ice cube dispenser and control panel
• 4 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

• BackLG Electronics GSL 361 ICEZ Side by Side

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

What you need

Step 1

              Remove Control Panel               

• Disconnect/unplug the refrigerator from the power supply!
• Use a spatula, knife, or other thin object to carefully apply to the underside of the control panel.
• Remove the control panel with some force
• A plug is attached to the back of the control panel, which must be removed.

Disconnect/unplug the refrigerator from the power supply!

Use a spatula, knife, or other thin object to carefully apply to the underside of the control panel.

Remove the control panel with some force

A plug is attached to the back of the control panel, which must be removed.

1024

Step 2

              Remove the chute bottom cover               

• Carefully open the marked lugs (break easily)
• The cover can then be pulled off downwards/forwards. Carefully remove the water hose.

Carefully open the marked lugs (break easily)

The cover can then be pulled off downwards/forwards. Carefully remove the water hose.

Step 3

              Remove the control panel shell               

• Remove the marked screws
• Gently pull the shell forward. First unplug the connector (marked blue) on the back of the shell, then loosen the screw of the click button (marked red) and pull it off.

Remove the marked screws

Gently pull the shell forward. First unplug the connector (marked blue) on the back of the shell, then loosen the screw of the click button (marked red) and pull it off.

Step 4

              Remove icebox lock               

• Open the brackets marked in red.
• Open the ice lid.
• Now turn the cover backwards over the horizontal axis and open the clip marked in blue.
• Carefully pull the cover off the two springs.

Open the brackets marked in red.

Open the ice lid.

Now turn the cover backwards over the horizontal axis and open the clip marked in blue.

Carefully pull the cover off the two springs.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

        oldturkey03 is helping us fix the world!      Want to contribute?      Start translating › 

Special thanks to these translators:

100%

oldturkey03

Author

                                      with 1 other contributor 

                    Hans Dampf                     

Member since: 04/26/2020

109 Reputation

                                      1 Guide authored                  



                       Badges:
                       1

hans lustig - Oct 25, 2022

Reply

Brillant always wondered how to access the tubing.