Lg Cosmos 2 Headphone Jack Replacement Repair Guide

Difficulty

Difficult

Steps

Time Required

                          6 - 10 minutes

Sections

Headphone Jack
9 steps

Flags

Needs More Images

A few more images would make this guide’s procedures crystal clear.

BackLG Cosmos 2
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Headphone Jack

First you will need to remove the back cover of the device.
You can do this with either a spudger or your fingers.
Carefully pry along the edges of the device until the cover pops off.

First you will need to remove the back cover of the device.

You can do this with either a spudger or your fingers.

Carefully pry along the edges of the device until the cover pops off.

1024

Step 2

Simply use the provided tab to lift the battery our of it’s housing and set it aside.

Simply use the provided tab to lift the battery our of it’s housing and set it aside.

Step 3

Use your screwdriver to gently unscrew the back part of the case.
Then use a spudger or your fingers to lift the case off of the motherboard housing.

Use your screwdriver to gently unscrew the back part of the case.

Then use a spudger or your fingers to lift the case off of the motherboard housing.

Step 4

Use a spudger to carefully detach the volume buttons.
The volume buttons are attached to a cable on the motherboard. Do not try and take them off completely.

Use a spudger to carefully detach the volume buttons.

The volume buttons are attached to a cable on the motherboard. Do not try and take them off completely.

Step 5

Use a spudger to carefully detach the camera button.
The camera button is attached to a cable on the motherboard. Do not try and take it off completely.

Use a spudger to carefully detach the camera button.

The camera button is attached to a cable on the motherboard. Do not try and take it off completely.

Step 6

Use a spudger or your finger to detach the motherboard from it’s housing. Slowly pry along the edges to free it from the plastic grips that hold it in place.
There is a cable that connects the motherboard to the rest of the phone. Be careful when pulling the motherboard from it’s housing so as not to disconnect it.

Use a spudger or your finger to detach the motherboard from it’s housing. Slowly pry along the edges to free it from the plastic grips that hold it in place.

There is a cable that connects the motherboard to the rest of the phone. Be careful when pulling the motherboard from it’s housing so as not to disconnect it.

Step 7

Use a spudger to detach the small red and blue cable from the motherboard. Do this by slowly lifting up each side until it pops out of it’s housing.

Use a spudger to detach the small red and blue cable from the motherboard. Do this by slowly lifting up each side until it pops out of it’s housing.

Step 8

Use your fingers to remove the black cover on the top of the motherboard. It simply pops off.
If you feel any resistance when trying to detach it, or it does not come off immediately, flip the motherboard over and detach the small plastic grips one by one.

Use your fingers to remove the black cover on the top of the motherboard. It simply pops off.

If you feel any resistance when trying to detach it, or it does not come off immediately, flip the motherboard over and detach the small plastic grips one by one.

Step 9

Carefully use a soldering iron to heat the bolts and then use a desoldering pump to pull the bolts out.
Then simply lift out the old headphone jack and fit in the new one.
During reassembly you need to fit in the new bolts and carefully solder them back in so as not to damage the motherboard.

Carefully use a soldering iron to heat the bolts and then use a desoldering pump to pull the bolts out.

Then simply lift out the old headphone jack and fit in the new one.

During reassembly you need to fit in the new bolts and carefully solder them back in so as not to damage the motherboard.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor

                    Henry Switala

Member since: 06/01/2016

101 Reputation

                                      1 Guide authored                  



                       Badges:
                       2

Team

                       Central Coast New Tech High, Team 7-1, Rushing Spring 2016                        

                                                  Member of Central Coast New Tech High, Team 7-1, Rushing Spring 2016 



                    CCNTH-RUSHING-S16S7G1                     


                                            1 Member                     


                                            2 Guides authored

Needs More Images#

Introduction#

What you need#

Team#

Needs More Images

Introduction

What you need

Team