Lg Cinebeam Motherboard Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          20 minutes

Sections

Bottom Plate
2 steps
Motherboard
3 steps

Flags

BackLG CineBeam
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

Typically, the motherboard doesn’t break easily when the device is closed. However, when opened, be careful as you could damage it or one of its parts.

Removing the motherboard also grants access to the other parts of the projector. This guide will help you through the process of removing the motherboard.

Before beginning, make sure to power off the projector completely and disconnect from any external power source.

When done, make sure all the cables/wires are placed correctly and secured.

What you need

Step 1

              Bottom Plate

Remove three 6 mm screws on the bottom plate with a Phillips #00 screwdriver.

Remove three 6 mm screws on the bottom plate with a Phillips #00 screwdriver.

1024

Step 2

Using an iFixit opening tool, pry the bottom plate off of the device and remove it fully.

Using an iFixit opening tool, pry the bottom plate off of the device and remove it fully.

Step 3

              Motherboard

Using an iFixit opening tool, press down the lever on the top of the minilock connector for the speaker and pull the plug out gently.
Repeat this process to remove the WiFi/Bluetooth card connector.
Remove the battery connector.
Remove the fan connectors.

Using an iFixit opening tool, press down the lever on the top of the minilock connector for the speaker and pull the plug out gently.

Repeat this process to remove the WiFi/Bluetooth card connector.

Remove the battery connector.

Remove the fan connectors.

Step 4

Using an iFixit opening tool, pry up the black plastic tabs on the back of the power button/joystick board cable.
Gently pull the ribbon cable out of the socket.
Repeat this process for the two display cables.

Using an iFixit opening tool, pry up the black plastic tabs on the back of the power button/joystick board cable.

Gently pull the ribbon cable out of the socket.

Repeat this process for the two display cables.

Step 5

Lift the motherboard out of the casing.

Lift the motherboard out of the casing.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors

                    John Dalton

Member since: 03/23/2022

384 Reputation

                                      4 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges

Team

                       UMass Dartmouth, Team 1-5, Botvin Spring 2022                        

                                                  Member of UMass Dartmouth, Team 1-5, Botvin Spring 2022 



                    UMASSD-BOTVIN-S22S1G5                     


                                            3 Members                     


                                            6 Guides authored

Introduction#

What you need#

Team#

Introduction

What you need

Team