Difficulty
Moderate
Steps
9
Time Required
Suggest a time??
Sections
4
- Battery
- 1 step
- Back Cover
- 2 steps
- Sliding Front
- 4 steps
- Sliding Mechanism
- 2 steps
Flags
Needs Better Images
Better photos will improve this guide. Help out by taking, editing, or uploading new ones!
Bullets!
Better coordination with markups and the color/type of bullets will help make this guide more clear!
Action Shots
Be an action hero! This guide needs images that better demonstrate how to perform specific actions.
Better Introduction
Improve this guide by completing or revising its introduction.
BackLG Chocolate
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Battery
- Find a sliding button on the lower back side of the device and with your finger, slide it to the left firmly.
- The battery should pop out fairly easily. If not, slide the button further or grab and pull it while sliding the button.
Find a sliding button on the lower back side of the device and with your finger, slide it to the left firmly.
The battery should pop out fairly easily. If not, slide the button further or grab and pull it while sliding the button.
1024
Step 2
Back Cover
- Unscrew the four Phillips 00 screws on the four corners under the battery to unfasten the back case from the phone.
Unscrew the four Phillips 00 screws on the four corners under the battery to unfasten the back case from the phone.
Step 3
- Pry the case off using a plastic opening tool.
- Continue working the plastic opening tool around the sides of the device, unhooking the eight tabs securing the back cover to the rest of the phone as shown in the second photo.
- The back speaker will be connected to the motherboard, and must be disconnected to remove the case.
Pry the case off using a plastic opening tool.
Continue working the plastic opening tool around the sides of the device, unhooking the eight tabs securing the back cover to the rest of the phone as shown in the second photo.
The back speaker will be connected to the motherboard, and must be disconnected to remove the case.
Step 4
Sliding Front
- Unscrew the 4 Phillips 00 screws that connect the two halves of the phone together.
Unscrew the 4 Phillips 00 screws that connect the two halves of the phone together.
Step 5
- Between the two halves is a ribbon. Use a plastic opening tool to flip up the lock and disconnect it.
Between the two halves is a ribbon. Use a plastic opening tool to flip up the lock and disconnect it.
Step 6
- Pry off the plastic tabs that cover two screws, as shown in the first picture.
- Then, remove the 6 Phillips 00 screws from the back of the case, as shown in the second picture.
Pry off the plastic tabs that cover two screws, as shown in the first picture.
Then, remove the 6 Phillips 00 screws from the back of the case, as shown in the second picture.
Step 7
- Pry off the back cover from the front of the case using a plastic opening tool.
Pry off the back cover from the front of the case using a plastic opening tool.
Step 8
Sliding Mechanism
- Unscrew the 4 screws that hold the sliding mechanism in place.
Unscrew the 4 screws that hold the sliding mechanism in place.
Step 9
- Remove sliding mechanism.
Remove sliding mechanism.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 4 other contributors
Thomas
Member since: 01/18/2013
91 Reputation
4 Guides authored
Badges:
10
+7 more badges
Team
Cal Poly, Team 19-46, Regan Winter 2013
Member of Cal Poly, Team 19-46, Regan Winter 2013
CPSU-REGAN-W13S19G46
4 Members
22 Guides authored