Difficulty

Moderate

Steps

8

Time Required

                          5 - 10 minutes

Sections

3

  • Battery
  • 2 steps
  • Back Cover
  • 4 steps
  • Rear Speaker
  • 2 steps

Flags

0

  • BackLG CF360

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • On the back of the phone, place your thumb on the three raised bumps and slide the back cover upward.

On the back of the phone, place your thumb on the three raised bumps and slide the back cover upward.

1024

Step 2

  • Lift and remove the battery.

Lift and remove the battery.

Step 3

              Back Cover
  • Remove the two screw covers at the top of phone with tweezers.

Remove the two screw covers at the top of phone with tweezers.

Step 4

  • Remove the six Phillips #000 (3mm) screws.

Remove the six Phillips #000 (3mm) screws.

Step 5

  • Use the plastic opening tool to pry the back cover off. Insert the tool between the back cover and red mid section and go around the entire phone.
  • The plastic side buttons fall out when you take the back cover off.
  • The back cover is connected to the speaker by red and black wires.

Use the plastic opening tool to pry the back cover off. Insert the tool between the back cover and red mid section and go around the entire phone.

The plastic side buttons fall out when you take the back cover off.

The back cover is connected to the speaker by red and black wires.

Step 6

  • Use the tweezers to remove the red and black wires connecting the speaker to the green motherboard by pinching the sides of the plastic base near the motherboard.
  • Set the back cover with the speaker aside.

Use the tweezers to remove the red and black wires connecting the speaker to the green motherboard by pinching the sides of the plastic base near the motherboard.

Set the back cover with the speaker aside.

Step 7

              Rear Speaker
  • Use the plastic opening tool to pry the speaker cover off of the phone.

Use the plastic opening tool to pry the speaker cover off of the phone.

Step 8

  • Use the plastic opening tool to pry the speaker out of the back cover.

Use the plastic opening tool to pry the speaker out of the back cover.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 3 other contributors 


                    Annie White

Member since: 10/18/2013

262 Reputation

                                      2 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       Cal Poly, Team 4-27, Amido Fall 2013                        

                                                  Member of Cal Poly, Team 4-27, Amido Fall 2013 



                    CPSU-AMIDO-F13S4G27                     


                                            4 Members                     


                                            16 Guides authored

Sarah Birkett - Apr 4, 2014

Reply

Where can I buy the replacement parts?