Featured
Featured Guide
Difficulty
Moderate
Steps
9
Time Required
15 - 30 minutes
Sections
3
- Battery
- 2 steps
- Back Cover
- 4 steps
- Motherboard
- 3 steps
Flags
2
Featured Student Guide
This guide has been the hard work of our awesome students and is found to be exceptionally cool by the iFixit staff.
Featured Guide
This guide has been found to be exceptionally cool by the iFixit staff.
BackLG CF360
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- On the back of the phone, place your thumb on the three raised bumps and slide the back cover upward.
On the back of the phone, place your thumb on the three raised bumps and slide the back cover upward.
1024
Step 2
- Lift and remove the battery.
Lift and remove the battery.
Step 3
Back Cover
- Remove the two screw covers at the top of phone with tweezers.
Remove the two screw covers at the top of phone with tweezers.
Step 4
- Remove the six Phillips #000 (3mm) screws.
Remove the six Phillips #000 (3mm) screws.
Step 5
- Use the plastic opening tool to pry the back cover off. Insert the tool between the back cover and red mid section and go around the entire phone.
- The plastic side buttons fall out when you take the back cover off.
- The back cover is connected to the speaker by red and black wires.
Use the plastic opening tool to pry the back cover off. Insert the tool between the back cover and red mid section and go around the entire phone.
The plastic side buttons fall out when you take the back cover off.
The back cover is connected to the speaker by red and black wires.
Step 6
- Use the tweezers to remove the red and black wires connecting the speaker to the green motherboard by pinching the sides of the plastic base near the motherboard.
- Set the back cover with the speaker aside.
Use the tweezers to remove the red and black wires connecting the speaker to the green motherboard by pinching the sides of the plastic base near the motherboard.
Set the back cover with the speaker aside.
Step 7
Motherboard
- Use the plastic opening tool to gently lift the snapped-in motherboard from the front panel.
- An orange ribbon from the LCD is connected to the underside of the motherboard, so do not force the motherboard from the rest of the phone yet.
Use the plastic opening tool to gently lift the snapped-in motherboard from the front panel.
An orange ribbon from the LCD is connected to the underside of the motherboard, so do not force the motherboard from the rest of the phone yet.
Step 8
- Gently remove the blue transparent tape from the connector.
Gently remove the blue transparent tape from the connector.
Step 9
- With the plastic opening tool, gently pry the LCD connector from the motherboard.
- Set the motherboard aside.
With the plastic opening tool, gently pry the LCD connector from the motherboard.
Set the motherboard aside.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
3 other people completed this guide.
Author
with 4 other contributors
Aaron
Member since: 10/15/2013
167 Reputation
1 Guide authored
Badges:
7
+4 more badges
Team
Cal Poly, Team 4-27, Amido Fall 2013
Member of Cal Poly, Team 4-27, Amido Fall 2013
CPSU-AMIDO-F13S4G27
4 Members
16 Guides authored
