Difficulty
Easy
Steps
4
Time Required
20 minutes
Sections
1
- Disc Drive
- 4 steps
Flags
0
BackLG BP220
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Disc Drive
- Ensure the device is unplugged to prevent shocks.
- Remove the three black 3/16” Phillips #2 screws from the backside of the player.
- With the backside (audio/video jacks) facing you, lift the part of the cover closer to you and pull until it is off.
Ensure the device is unplugged to prevent shocks.
Remove the three black 3/16” Phillips #2 screws from the backside of the player.
With the backside (audio/video jacks) facing you, lift the part of the cover closer to you and pull until it is off.
1024
Step 2
- Using your fingers, pull the three tape-like cables to disconnect the disc drive from the green motherboard.
Using your fingers, pull the three tape-like cables to disconnect the disc drive from the green motherboard.
Step 3
- Unhinge the tabs that attach the front panel to the unit:
- Two tabs on the disc drive
- Two tabs on the left and right side of the player
- Be careful when handling these tabs. They are very fragile and can be easily broken.
- Three tabs on the underside of the player
- Pull panel away from case.
- If the panel does not come off right away, be sure to check if tabs have inadvertently switched back to their locked position.
Unhinge the tabs that attach the front panel to the unit:
Two tabs on the disc drive
Two tabs on the left and right side of the player
Be careful when handling these tabs. They are very fragile and can be easily broken.
Three tabs on the underside of the player
Pull panel away from case.
If the panel does not come off right away, be sure to check if tabs have inadvertently switched back to their locked position.
Step 4
- Remove the two black 3/16” Phillips #2 mounting screws from the left and right side of the disc drive.
- With the front side facing you lift the front of disc drive and pull out to remove.
Remove the two black 3/16” Phillips #2 mounting screws from the left and right side of the disc drive.
With the front side facing you lift the front of disc drive and pull out to remove.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
5 other people completed this guide.
Author
with 3 other contributors
Bart Quicho
Member since: 01/13/2015
463 Reputation
3 Guides authored
Badges:
11
+8 more badges
Team
UW Tacoma, Team 1-1, Rose Winter 2015
Member of UW Tacoma, Team 1-1, Rose Winter 2015
UWT-ROSE-W15S1G1
4 Members
3 Guides authored