Difficulty
Easy
Steps
9
Time Required
30 minutes
Sections
1
- Screen
- 9 steps
Flags
Better Introduction
Improve this guide by completing or revising its introduction.
BackLG Aristo
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Screen
- Turn off the device and make sure you are working on a flat, lit surface.
Turn off the device and make sure you are working on a flat, lit surface.
1024
Step 2
- Use an iFixit opening tool to pry off the back case.
Use an iFixit opening tool to pry off the back case.
Step 3
- Remove the SD and SIM cards by sliding the cards out with your finger.
Remove the SD and SIM cards by sliding the cards out with your finger.
Step 4
- Remove the battery by prying it up with a fingernail or opening tool from the bottom edge.
Remove the battery by prying it up with a fingernail or opening tool from the bottom edge.
Step 5
- Remove the ten screws from the midframe with a Phillips #000 screwdriver.
Remove the ten screws from the midframe with a Phillips #000 screwdriver.
Step 6
- Pry up on the screen with a plastic opening tool.
- Try to avoid using a metal spudger as shown in the images as it has the possibility to damage the screen.
Pry up on the screen with a plastic opening tool.
Try to avoid using a metal spudger as shown in the images as it has the possibility to damage the screen.
Step 7
- Detach the cables from the press fit connectors.
- There are four connectors in total, they consist of two on the cameras, one on the ear jack, and the one attached to the motherboard.
- You can lift them up with you finger or you can use tweezers (optional).
Detach the cables from the press fit connectors.
There are four connectors in total, they consist of two on the cameras, one on the ear jack, and the one attached to the motherboard.
You can lift them up with you finger or you can use tweezers (optional).
Step 8
- Gently remove the motherboard.
Gently remove the motherboard.
Step 9
- Replace the screen.
Replace the screen.
To reassemble your device, follow these instructions in reverse order. I hope that these steps have helped you with your issue.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 4 other contributors
Geobanny Cardenas
Member since: 08/26/2019
184 Reputation
1 Guide authored
Badges:
6
+3 more badges
Team
Gateway, Team S1-G5, Saknee Fall 2019
Member of Gateway, Team S1-G5, Saknee Fall 2019
GCC-SAKNEE-F19S1G5
4 Members
1 Guide authored
chuck - Jan 18, 2020
Reply
Do i need Loca Glue to replace the outer Glass?