Lg Aristo Ms210 Front And Rear Camera Replacement Repair Guide

Difficulty

Moderate

Steps

7

Time Required

                          45 minutes            

Sections

3

• Battery
• 2 steps
• Command Button
• 2 steps
• Front and Rear Camera
• 3 steps

Flags

1

Better Introduction

Improve this guide by completing or revising its introduction.

• BackLG Aristo MS210

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Battery               

• Insert the spudger into the notch on the bottom left side of the phone.
• Apply light pressure to remove the back cover.

Insert the spudger into the notch on the bottom left side of the phone.

Apply light pressure to remove the back cover.

1024

Step 2

• Insert the spudger into the notch located on the bottom middle of the battery.
• Apply light pressure to remove the battery.

Insert the spudger into the notch located on the bottom middle of the battery.

Apply light pressure to remove the battery.

Step 3

              Command Button               

• Use the PH000 bit unscrew the ten 3.4mm screws as highlighted.
• Use the spudger to remove the inner shell.
• Flip the inner shell over to expose the clips holding the command button.

Use the PH000 bit unscrew the ten 3.4mm screws as highlighted.

Use the spudger to remove the inner shell.

Flip the inner shell over to expose the clips holding the command button.

Step 4

• Use the spudger disconnect the three clips holding in the command button as highlighted.
• Remove the command button.

Use the spudger disconnect the three clips holding in the command button as highlighted.

Remove the command button.

Step 5

              Front and Rear Camera               

• Use the spudger to disconnect the ZIF connector securing the front-facing camera.

Use the spudger to disconnect the ZIF connector securing the front-facing camera.

Step 6

• Use the spudger disconnect the ZIF connector securing the back-facing camera.

Use the spudger disconnect the ZIF connector securing the back-facing camera.

Step 7

• Remove both the front and back facing cameras.

Remove both the front and back facing cameras.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 

                    John Bauman                     

Member since: 10/03/2022

265 Reputation

                                      3 Guides authored                  



                       Badges:
                       4







                                                        +1 more badge                           

Team

                       The Citadel Military College of South Carolina, Team 1-9, Eggleston Fall 2022                        

                                                  Member of The Citadel Military College of South Carolina, Team 1-9, Eggleston Fall 2022 



                    CMCSC-EGGLESTON-F22S1G9                     


                                            3 Members                     


                                            3 Guides authored