Difficulty
Moderate
Steps
8
Time Required
30 minutes
Sections
2
- Battery
- 2 steps
- Touch Screen
- 6 steps
Flags
Confusing Text
Some of this guide’s text is confusing, duplicated, or off-topic. Clarify it by editing!
Slice and Dice
The steps in this guide should be split up and made into a series of prerequisite guides.
BackLG 305C
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Pry open the back case on the device with a plastic opening tool and remove it.
Pry open the back case on the device with a plastic opening tool and remove it.
1024
Step 2
- Pry the battery out of the device with a plastic opening tool and remove it.
Pry the battery out of the device with a plastic opening tool and remove it.
Step 3
Touch Screen
- Here you can identify your device by reading the Model number which should read LG 305C.
- Having done this you can be sure your device is an LG 305C and we can continue onto replacing the screen.
Here you can identify your device by reading the Model number which should read LG 305C.
Having done this you can be sure your device is an LG 305C and we can continue onto replacing the screen.
Step 4
SD Card Removal
- From here you can refer to our SD Card replacement guide in order to continue to the next step.
- LG 305C MicroSD card Replacement
From here you can refer to our SD Card replacement guide in order to continue to the next step.
LG 305C MicroSD card Replacement
Step 5
- Use a Phillips #00 screwdriver to remove the seven screws that are located along the edges of the device.
Use a Phillips #00 screwdriver to remove the seven screws that are located along the edges of the device.
Step 6
- Once finished removing all seven Phillips screws we can begin to separate the first layer of the screen and back.
- Here you will need to use your plastic pry tool for this step. Along the edges of the device you should be able to pry on the plastic side of the screen to loosen it.
- There is also a notch shown in picture 2 you will need to push in.
Once finished removing all seven Phillips screws we can begin to separate the first layer of the screen and back.
Here you will need to use your plastic pry tool for this step. Along the edges of the device you should be able to pry on the plastic side of the screen to loosen it.
There is also a notch shown in picture 2 you will need to push in.
Step 7
- Once loose you can remove the front end of the screen by gentle swinging it out from its notched in position. like so in the three movements
Once loose you can remove the front end of the screen by gentle swinging it out from its notched in position. like so in the three movements
Step 8
- This step we will be separating the motherboard and the plastic screen mold.
- You will need to gentle with your finger pry the Touch screen connection that is attached to the motherboard off.
- Once detached you will gentle separate the two pieces.
- When finished it should look like picture 2.
This step we will be separating the motherboard and the plastic screen mold.
You will need to gentle with your finger pry the Touch screen connection that is attached to the motherboard off.
Once detached you will gentle separate the two pieces.
When finished it should look like picture 2.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 4 other contributors
alex Benitez
Member since: 10/24/2016
103 Reputation
1 Guide authored
Badges:
3
Team
Texas Tech, Team 1-3, Bennett Fall 2016
Member of Texas Tech, Team 1-3, Bennett Fall 2016
TTU-BENNETT-F16S1G3
6 Members
2 Guides authored