Difficulty

Moderate

Steps

8

Time Required

                          3 minutes

Sections

4

  • Battery
  • 2 steps
  • MicroSD card
  • 1 step
  • Internal Casing
  • 4 steps
  • Motherboard
  • 1 step

Flags

0

  • BackLG 305C

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Pry open the back case on the device with a plastic opening tool and remove it.

Pry open the back case on the device with a plastic opening tool and remove it.

1024

Step 2

  • Pry the battery out of the device with a plastic opening tool and remove it.

Pry the battery out of the device with a plastic opening tool and remove it.

Step 3

              MicroSD card
  • Dislodge the microSD card from the microSD card slot using your index finger and remove it.

Dislodge the microSD card from the microSD card slot using your index finger and remove it.

Step 4

              Internal Casing
  • Remove the three 4 mm screws using a JIS screwdriver with a J000 head from the bottom part of the internal casing.

Remove the three 4 mm screws using a JIS screwdriver with a J000 head from the bottom part of the internal casing.

Step 5

  • Pry open the bottom part of the internal casing with the plastic opening tool and remove it.

Pry open the bottom part of the internal casing with the plastic opening tool and remove it.

Step 6

  • Remove the four 4 mm screws using a JIS screwdriver with a J000 head from the top part of the internal casing.

Remove the four 4 mm screws using a JIS screwdriver with a J000 head from the top part of the internal casing.

Step 7

  • Pry open the top part of the internal casing with the plastic opening tool and remove it.

Pry open the top part of the internal casing with the plastic opening tool and remove it.

Step 8

              Motherboard
  • Pry the screen from the internal circuit board with a plastic opening tool and remove it.

Pry the screen from the internal circuit board with a plastic opening tool and remove it.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Ashley Kidwell

Member since: 03/20/2018

427 Reputation

                                      5 Guides authored                  



                       Badges:
                       5







                                                        +2 more badges

Team

                       IUPUI, Team S6-G1, Baechle Spring 2018                        

                                                  Member of IUPUI, Team S6-G1, Baechle Spring 2018 



                    IUPUI-BAECHLE-S18S6G1                     


                                            3 Members                     


                                            12 Guides authored