Difficulty
Moderate
Steps
6
Time Required
5 - 10 minutes
Sections
1
- Front Cover
- 6 steps
Flags
2
Incorrect Tools
Help make this guide better by using the correct tools in images and/or text.
Missing Prerequisites
This guide is missing information on how to start the process. Make a prerequisite guide!
BackLG 1010
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Front Cover
- Use a Spudger to remove the two front plastic covers to reveal screws.
Use a Spudger to remove the two front plastic covers to reveal screws.
1024
Step 2
- Remove two screws using a Torx T6 screwdriver.
Remove two screws using a Torx T6 screwdriver.
Step 3
- Pry off the screen front cover with a small flathead screwdriver.
Pry off the screen front cover with a small flathead screwdriver.
Step 4
- Insert a small flathead screwdriver into the hinge and separate hinge connection.
Insert a small flathead screwdriver into the hinge and separate hinge connection.
Step 5
- Pry off the speaker which is glued on to the front cover using a small flathead screwdriver.
Pry off the speaker which is glued on to the front cover using a small flathead screwdriver.
Step 6
- Remove remaining portion of the front case from the flexible circuit board.
- Do not attempt to remove the LCD board at this time, as it is attached to the rear panel assembly.
Remove remaining portion of the front case from the flexible circuit board.
Do not attempt to remove the LCD board at this time, as it is attached to the rear panel assembly.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 6 other contributors
Nicholas Schmidt
Member since: 10/09/2010
97 Reputation
7 Guides authored
Badges:
8
+5 more badges
Team
Cal Poly, Team 3-25, Regan Fall 2010
Member of Cal Poly, Team 3-25, Regan Fall 2010
CPSU-REGAN-F10S3G25
4 Members
14 Guides authored