Difficulty
Moderate
Steps
15
Time Required
20 - 30 minutes
Sections
2
- Duplex Unit
- 2 steps
- Scanner Unit
- 13 steps
Flags
3
Confusing Text
Some of this guide’s text is confusing, duplicated, or off-topic. Clarify it by editing!
Incorrect Tools
Help make this guide better by using the correct tools in images and/or text.
Markup Mishap
This guide needs better markups. Help out by correcting or making some markup annotations.
BackLexmark Intuition S505
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Duplex Unit
- Hold the button down with the flat end away from the printer. When you hear a click, the duplex unit can be removed from the printer.
Hold the button down with the flat end away from the printer. When you hear a click, the duplex unit can be removed from the printer.
1024
Step 2
- Remove the duplex unit from the back of the printer with the duplex unit facing up.
Remove the duplex unit from the back of the printer with the duplex unit facing up.
Step 3
Scanner Unit
- Locate the two screw holes that connect the two cylindrical extensions from the top portion of the scanner unit to the printer.
Locate the two screw holes that connect the two cylindrical extensions from the top portion of the scanner unit to the printer.
Step 4
- Unscrew the two size#6 (5-mm head) Phillips 1-mm screws connecting the scanner unit to the printer.
Unscrew the two size#6 (5-mm head) Phillips 1-mm screws connecting the scanner unit to the printer.
Step 5
- Raise and close the scanner unit to observe that the hinges lock in place when lifted.
Raise and close the scanner unit to observe that the hinges lock in place when lifted.
Step 6
- Firmly press the hinges inward toward the middle of the printer on both sides at the same time. The hinges should be easily lifted up and removed.
Firmly press the hinges inward toward the middle of the printer on both sides at the same time. The hinges should be easily lifted up and removed.
Step 7
- Locate the three screws connecting the plastic tray to the printer.
Locate the three screws connecting the plastic tray to the printer.
Step 8
- Remove the three size#6 (5-mm head) Phillips 1-mm screws connecting the scanner unit to the printer.
Remove the three size#6 (5-mm head) Phillips 1-mm screws connecting the scanner unit to the printer.
Step 9
- Remove the plastic cover by unlocking the plastic hinges at the inside edges of the printer. Use a plastic opening tool or a tweezer to slowly move in between the crease around the printer to unlock it.
Remove the plastic cover by unlocking the plastic hinges at the inside edges of the printer. Use a plastic opening tool or a tweezer to slowly move in between the crease around the printer to unlock it.
Step 10
- Slowly raise, but do not remove the plastic cover with the scanner unit so that it exposes the three cables connecting the scanner unit to the printer.
Slowly raise, but do not remove the plastic cover with the scanner unit so that it exposes the three cables connecting the scanner unit to the printer.
Step 11
- Carefully unplug the pink cable.
Carefully unplug the pink cable.
Step 12
- Carefully unplug the gray data cable.
Carefully unplug the gray data cable.
Step 13
- Carefully unplug the white ribbon data cable.
Carefully unplug the white ribbon data cable.
Step 14
- Locate the three ports for the cables from the scanner unit and make sure they are unplugged.
Locate the three ports for the cables from the scanner unit and make sure they are unplugged.
Step 15
- Remove the scanner unit with the plastic cover by lifting it up from the bottom portion of the printer.
- Be careful with the paper tray and make sure it is evenly lifted through the rectangular hole in the plastic tray
Remove the scanner unit with the plastic cover by lifting it up from the bottom portion of the printer.
Be careful with the paper tray and make sure it is evenly lifted through the rectangular hole in the plastic tray
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 6 other contributors
Raymond
Member since: 01/15/2013
45 Reputation
2 Guides authored
Badges:
11
+8 more badges
Team
Cal Poly, Team 18-38, Regan Winter 2013
Member of Cal Poly, Team 18-38, Regan Winter 2013
CPSU-REGAN-W13S18G38
4 Members
4 Guides authored