Lexibook Junior Tablet Speaker Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          30 minutes

Sections

Battery
4 steps
Speaker
2 steps

Flags

BackLexibook Junior Tablet
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Battery

Make sure your device is powered off before replacement to prevent electric shock.
With the device screen face down, use the metal spudger to remove the small rubber circles on all four corners of the device. The screws should now be revealed.
Using the metal spudger, pry open the small, long rubber rectangle on the back of the device to reveal more screws.

Make sure your device is powered off before replacement to prevent electric shock.

With the device screen face down, use the metal spudger to remove the small rubber circles on all four corners of the device. The screws should now be revealed.

Using the metal spudger, pry open the small, long rubber rectangle on the back of the device to reveal more screws.

1024

Step 2

Using a Phillips #00 screwdriver, remove the four 6.8mm screws from the four corners of the device.
Using the same screwdriver, remove the three screws that were behind the rubber rectangle. These screws do not come out of the device.
Use the plastic opening tool to gently pry open the back panel of the tablet.

Using a Phillips #00 screwdriver, remove the four 6.8mm screws from the four corners of the device.

Using the same screwdriver, remove the three screws that were behind the rubber rectangle. These screws do not come out of the device.

Use the plastic opening tool to gently pry open the back panel of the tablet.

Step 3

Use the nylon spudger to gently pry under the battery to remove it.
Make sure you do not damage the battery or metal plate in this process and only use a nylon spudger. Be patient and work slowly for the best results.

Use the nylon spudger to gently pry under the battery to remove it.

Make sure you do not damage the battery or metal plate in this process and only use a nylon spudger. Be patient and work slowly for the best results.

Step 4

Use a soldering iron to remove the battery from the motherboard safely.
For advice on how to solder, check out iFixit’s Soldering Guide.

Use a soldering iron to remove the battery from the motherboard safely.

For advice on how to solder, check out iFixit’s Soldering Guide.

Step 5

              Speaker

Using the plastic opening tool, gently pry the speaker out of its plastic housing.

Using the plastic opening tool, gently pry the speaker out of its plastic housing.

Step 6

Solder the speaker off the motherboard.
For how to solder, check out iFixit’s Soldering Guide.

Solder the speaker off the motherboard.

For how to solder, check out iFixit’s Soldering Guide.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 5 other contributors

                    Rachel Klesius

Member since: 09/19/2016

645 Reputation

                                      6 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       USF Tampa, Team 17-3, Blackwell Fall 2016                        

                                                  Member of USF Tampa, Team 17-3, Blackwell Fall 2016 



                    USFT-BLACKWELL-F16S17G3                     


                                            4 Members                     


                                            12 Guides authored

Introduction#

What you need#

Team#

Introduction

What you need

Team