Difficulty
Easy
Steps
5
Time Required
10 minutes
Sections
1
- Fret Buttons
- 5 steps
Flags
0
BackGuitar Hero III Guitar
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Fret Buttons
- Pull the Lock on the back of the body to detach the neck from the body.
Pull the Lock on the back of the body to detach the neck from the body.
1024
Step 2
- Remove the 10 screws (each are 1 cm long) on the back of the neck using a T-10 Torx security screwdriver.
- Remove the back of the neck.
Remove the 10 screws (each are 1 cm long) on the back of the neck using a T-10 Torx security screwdriver.
Remove the back of the neck.
Step 3
- Unscrew the two screws on the fret PCB using a PH1 Phillips head screwdriver. Each screw is 0.8 cm.
- Remove the fret PCB
- The fret PCB is in very tight. Be careful not to break it.
- The connector from the neck to the body can easily slide out of place. Make sure it is in position before closing the neck
Unscrew the two screws on the fret PCB using a PH1 Phillips head screwdriver. Each screw is 0.8 cm.
Remove the fret PCB
The fret PCB is in very tight. Be careful not to break it.
The connector from the neck to the body can easily slide out of place. Make sure it is in position before closing the neck
Step 4
- Remove the blue fret button pad.
- This pad should not be attached in any way
Remove the blue fret button pad.
This pad should not be attached in any way
Step 5
- The fret buttons should now easily slide out.
The fret buttons should now easily slide out.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
5 other people completed this guide.
Author
with 6 other contributors
Chris
Member since: 10/18/2013
839 Reputation
6 Guides authored
Badges:
14
+11 more badges
