Difficulty
Easy
Steps
5
Time Required
Suggest a time??
Sections
2
- Les Paul Wireless Guitar Body Teardown
- 3 steps
- Battery Pack
- 2 steps
Flags
0
BackGuitar Hero III Guitar
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Les Paul Wireless Guitar Body Teardown
- Remove batteries
Remove batteries
1024
Step 2
- Remove void warranty sticker
- The sticker is covering a torx screw
Remove void warranty sticker
The sticker is covering a torx screw
Step 3
- Unscrew the 11 screws securing the back of the body using a T10 Torx screwdriver. Each screw is 1 cm long.
- Push level, this will detach the back of the guitar from the front.
- Carefully remove the back of the body
- The battery pack cord is attached to both sides of the guitar, be careful not to tear it apart.
- The neck connector may be stuck to the back so be sure to detach it before fully pulling
Unscrew the 11 screws securing the back of the body using a T10 Torx screwdriver. Each screw is 1 cm long.
Push level, this will detach the back of the guitar from the front.
Carefully remove the back of the body
The battery pack cord is attached to both sides of the guitar, be careful not to tear it apart.
The neck connector may be stuck to the back so be sure to detach it before fully pulling
Step 4
Battery Pack
- Gently move the capacitor around until it breaks off
Gently move the capacitor around until it breaks off
Step 5
- Solder on the new capacitor.
Solder on the new capacitor.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 5 other contributors
Chris
Member since: 10/18/2013
839 Reputation
6 Guides authored
Badges:
14
+11 more badges
Chris - Oct 22, 2016
Reply
Yo can you help for the drum set I saw two wires detached ( red an black) when I I opened it up. Please email me so I can send a picture djcab361@outlook.com