Difficulty

Easy

Steps

8

Time Required

                          8 - 10 minutes

Sections

1

  • Screw Terminal
  • 8 steps

Flags

0

  • BackFloor Lamp

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

If you notice your lamp’s cords and plug are intact, or your lamp’s lighting bulb is properly functioning, then your lamp’s lighting socket may need to be replaced.

What you need

Step 1

              Screw Terminal
  • Unplug the lamp.

Unplug the lamp.

1024

Step 2

  • Rotate the bulb counterclockwise to remove the light bulb.

Rotate the bulb counterclockwise to remove the light bulb.

Step 3

  • Rotate the lamp shade counterclockwise.

Rotate the lamp shade counterclockwise.

Step 4

  • Take the three parts aside after dismantling the lamp shade.

Take the three parts aside after dismantling the lamp shade.

Step 5

  • Dismantle the lamp shaft by rotating it counterclockwise.

Dismantle the lamp shaft by rotating it counterclockwise.

Step 6

  • Use a Phillips screwdriver to remove the two 3 mm screws from the silver cover.
  • Pull down both the silver cover and the black screw terminal.

Use a Phillips screwdriver to remove the two 3 mm screws from the silver cover.

Pull down both the silver cover and the black screw terminal.

Step 7

  • Separate the light bulb socket from the silver cover by pulling the silver metal hasp in right-downward direction towards the lamp shaft.
  • Exert force on the both left and right hand sides of the hasp and then pull the hasp downward.

Separate the light bulb socket from the silver cover by pulling the silver metal hasp in right-downward direction towards the lamp shaft.

Exert force on the both left and right hand sides of the hasp and then pull the hasp downward.

Step 8

  • Replace the old bulb socket with a newly-purchased one.

Replace the old bulb socket with a newly-purchased one.

To reassemble your device, follow these instructions in reverse order.

Replacing the screw terminal of the floor lamp is relatively easy, but be cautious to deal with the step of the substitution of the light socket.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    Jiajun Guo

Member since: 05/09/2020

157 Reputation

                                      1 Guide authored                  



                       Badges:
                       3

Team

                       York University, Team S1-G11, O'Regan Summer 2020                        

                                                  Member of York University, Team S1-G11, O'Regan Summer 2020 



                    YORK-O'REGAN-SU20S1G11                     


                                            1 Member                     


                                            1 Guide authored