Lens Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          45 minutes

Sections

Lens
4 steps

Flags

BackSamsung DV180F
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Removing the Battery

Flip the small blue switch up to release the battery. Remove the battery.
Remove two Philips #000 screws. Place the screws on a magnetic pad or somewhere safe.
Insert a plastic opening tool in the corner by the Micro USB plug. This area will allow leverage in order to take off the outer case.

Flip the small blue switch up to release the battery. Remove the battery.

Remove two Philips #000 screws. Place the screws on a magnetic pad or somewhere safe.

Insert a plastic opening tool in the corner by the Micro USB plug. This area will allow leverage in order to take off the outer case.

1024

Step 2

              Removing the Outer Casing

Use the opening tool and your fingers to pry apart the outer case. Hold back camera as well as menu navigation buttons while you remove the case.
Unscrew two small Phillips screws holding the outer case to the motherboard. Use the opening tool to unhook the case from the plate covering the motherboard.

Use the opening tool and your fingers to pry apart the outer case. Hold back camera as well as menu navigation buttons while you remove the case.

Unscrew two small Phillips screws holding the outer case to the motherboard. Use the opening tool to unhook the case from the plate covering the motherboard.

Step 3

              Removing the Ribbon

Disconnect the button casing ribbon cable from the motherboard.
Be gentle when removing the ribbon.
Lift up the metal casing with one hand and use the other hand to snap the ZIF connector back, in order to remove the display ribbon cable.

Disconnect the button casing ribbon cable from the motherboard.

Be gentle when removing the ribbon.

Lift up the metal casing with one hand and use the other hand to snap the ZIF connector back, in order to remove the display ribbon cable.

Step 4

              Replacing the Lens

Remove the display and buttons.
Release the clamp on the two ribbon cables connected to the camera lens.
Be gentle when removing the ribbons cables. They are fragile and can tear.
Pull the lens out of the camera base.

Remove the display and buttons.

Release the clamp on the two ribbon cables connected to the camera lens.

Be gentle when removing the ribbons cables. They are fragile and can tear.

Pull the lens out of the camera base.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 6 other contributors

                    salome datong

Member since: 09/26/2016

104 Reputation

                                      1 Guide authored                  



                       Badges:
                       4







                                                        +1 more badge

Team

                       USF Tampa, Team 14-4, Eyestone Fall 2016                        

                                                  Member of USF Tampa, Team 14-4, Eyestone Fall 2016 



                    USFT-EYESTONE-F16S14G4                     


                                            4 Members                     


                                            8 Guides authored

Introduction#

What you need#

#

#

#

#

#

#

Team#

#

Introduction

What you need

Team