Lenovo Yoga Tab 3 10 Wifi Module Replacement Repair Guide

Difficulty

Easy

Steps

7

Time Required

                          4 minutes            

Sections

2

• Back Cover
• 3 steps
• Wifi Module
• 4 steps

Flags

0

• BackLenovo Yoga Tab 3 10

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Back Cover               

• Open the built-in kickstand.

Open the built-in kickstand.

1024

Step 2

• Remove the sticker located directly under the the built-in kickstand to reveal two 0.75 mm screws.
• Remove the microSD card slot cover. Remove any microSD card (if inserted).
• Using a Phillips head screwdriver, remove the three 0.75 mm screws.

Remove the sticker located directly under the the built-in kickstand to reveal two 0.75 mm screws.

Remove the microSD card slot cover. Remove any microSD card (if inserted).

Using a Phillips head screwdriver, remove the three 0.75 mm screws.

Step 3

• Orient the device so the screen is facing you.
• Carefully insert the spudger along the seam between the screen and back cover and gently separate the back cover from the device frame.
• Continue to detach the backplate from the frame by moving the spudger around the perimeter.
• Some force will be required to detach the small plastic braces securing the backplate to the device.

Orient the device so the screen is facing you.

Carefully insert the spudger along the seam between the screen and back cover and gently separate the back cover from the device frame.

Continue to detach the backplate from the frame by moving the spudger around the perimeter.

Some force will be required to detach the small plastic braces securing the backplate to the device.

Step 4

              Wifi Module               

• Use the nylon spudger to gently lift the foil cover of the wifi model.

Use the nylon spudger to gently lift the foil cover of the wifi model.

Step 5

• Use tweezers to gently lift the gold tape located above the copper foil.

Use tweezers to gently lift the gold tape located above the copper foil.

Step 6

• Use the plastic spudger to disconnect the wifi module connector from the motherboard.

Use the plastic spudger to disconnect the wifi module connector from the motherboard.

Step 7

• Carefully lift the wifi module from the device.

Carefully lift the wifi module from the device.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 5 other contributors 

                    Phanudej                     

Member since: 02/20/2017

1,166 Reputation

                                      5 Guides authored                  



                       Badges:
                       12







                                                        +9 more badges                           

Team

                       USF Tampa, Team S3-G2, Sullivan Spring 2017                        

                                                  Member of USF Tampa, Team S3-G2, Sullivan Spring 2017 



                    USFT-SULLIVAN-S17S3G2                     


                                            4 Members                     


                                            18 Guides authored                     

rebeca rackolavsci - Nov 3, 2020

Reply

where can i buy this type of module?